Adjusting POS. /SIZE, Using Remote Control

Adjusting POS. /SIZE

Press to display the POS. /SIZE menu. Press to select the menu to adjust.

Press to adjust the menu.

During “VIDEO (S VIDEO)”, “Digital”, “SDI” and “HDMI” input signal.

POS. /SIZE

NORMALIZE	NORMAL
AUTO SETUP		0
H-POS		0
H-SIZE		0
V-POS		0
V-SIZE		0
1:1 PIXEL MODE		OFF

During “COMPONENT”, “RGB” and “PC” input signal.

POS. /SIZE

NORMALIZE NORMAL

Press to exit from adjust mode.

AUTO SETUP

H-POS

H-SIZE

V-POS

V-SIZE

Notes:

DOT CLOCK

CLOCK PHASE

• Unadjustable items are grayed out.

1:1 PIXEL MODE

OFF

Adjustable items differ depending on the input signal and the display mode.

•Adjustment details are memorized separately for different input signal formats.

(Adjustments for component signals are memorized for 525 (480) / 60i · 60p, 625 (575) / 50i · 50p, 1125 (1080) / 60i · 50i · 60p · 50p · 24p · 25p · 30p · 24sF, 1250 (1080) / 50i, 750 (720) / 60p · 50p each, and RGB/PC/Digital signals are memorized for each frequency.)

•If a “Cue” or “Rew” signal from a VCR or DVD player is received, the picture position will shift up or down. This picture position movement cannot be controlled by the POS. /SIZE function.

•If adjusting the PICTURE V-POS / V-SIZE in Panasonic AUTO with FULL mode, the adjustment is not memorized. When exiting the mode, the screen will return to a former adjustment.

AUTO H-POS/V-POS, H-SIZE/V-SIZE, DOT CLOCK and CLOCK PHASE are automatically adjusted when the

SETUP RGB or PC signal is received.

This setting is enabled under the following conditions:

•This setting only support single screen display. Two screen display or multiple display are not supported.

•When “COMPONENT/RGB-IN SELECT” or “YUV/RGB-IN SELECT” in the “SET UP” menu (see page 52) is set to “RGB”, this setting is enabled.

•When the signal is not PC format, this setting is enabled only if “OVER SCAN” (see page 26) is “OFF” or “1:1 PIXEL MODE” (see page 27) is “ON”, and H-SIZE/V-SIZE is not automatically adjusted.

This setting will be invalid and will not work under the following conditions:

•Aspect is set to “JUST”

•“Display size” in the Options menu (see page 56) is set to “On”

Using Remote Control

Note:

To operate this function, please purchase remote controller sold separately.

Object model : N2QAYB000432

When on the remote control is pressed, “AUTO SETUP” will be executed.

When AUTO SETUP does not work, “INVALID” is displayed.

Auto mode

When the “Auto Setup“ is set to “Auto” in the Options menu (see page 57), automatic position adjustment starts:

•When the display power is turned ON.

•When the input signal is switched.