Panasonic 103PF12U manual Shipping condition

Options Adjustments

6	Press to select Command No.
	Press to select a command number.

Command setting screen

Weekly Command Timer

	Program	1
Command No		02
Time		10:30
Command	IMS:SL1

7	Press to select Time / Command.
		Weekly Command Timer
	Press to set each item.		Program
					1
	Time: Set the time to execute a command program.	Command No			02
		Time		10:30
	Pressing “ ” or “ ” button once changes “Time” 1
		Command	IMS:SL1
	minute.
	Pressing “ ” or “ ” button continuously changes “Time” by 15 minutes.
	Command: Select a command to execute at the set time. This unit has 64 commands to set.
	(see page 64)
	Notes:
	• Command is performed in order of execution time, regardless of the command number.
	• If a command execution time overlaps with that of other commands, these commands are
	performed in number order.
Note:	• Pressing , Time becomes --:-- and Command becomes ---.
Press to return to the previous screen.

Shipping condition

This function allows you to reset the unit to the factory setting.

1 Press to display the SET UP menu.

2	Press to select “OSD LANGUAGE”.
	Press for more than 3 seconds.
3	Press to select “Shipping”.
	Press to display the Shipping menu.
4	Press to select “YES”.

Press to confirm. [from the unit]

1Press the MENU button till the SET UP menu is displayed.

2Press the Volume Up “+” or Down “–” button to select “OSD LANGUAGE”.

3Press and hold the ENTER button till the Shipping menu is displayed.

4Press the Volume Up “+” or Down “–” button to select “YES”.

5Press the ENTER button and wait for 10 sec.

SET UP	1/2
SIGNAL
SCREENSAVER
EXTENDED LIFE SETTINGS
COMPONENT/RGB-IN SELECT
	RGB
INPUT LABEL	PC
POWER SAVE	OFF
STANDBY SAVE	OFF
POWER MANAGEMENT	OFF
AUTO POWER OFF	OFF
OSD LANGUAGE	ENGLISH (US)
Options
Shipping
Shipping
YES	NO

59