Panasonic 103PF12U manual Picture Adjustments, Standard, Dynamic, Cinema, Monitor

PICTURE Adjustments

1

2

Press to display the PICTURE menu.

Select to adjust each item.

Press to select the menu to adjust.

Select the desired level by looking at the picture behind the menu.

Note:

Menu that cannot be adjusted is grayout. Adjustable menu changes depending on signal, input and menu setting.

PICTURE
NORMALIZE NORMAL	STANDARD
PICTURE MENU
PICTURE	25
BRIGHTNESS	0
COLOR	0
TINT	0
SHARPNESS	5
COLOR TEMP	NORMAL
COLOR MANAGEMENT	OFF
ADVANCED SETTINGS

Press to enter Advanced

Settings.

ADVANCED SETTINGS

Enables fine picture adjustment at a professional level (see next page).

ADVANCED SETTINGS

NORMALIZE NORMAL	0
BLACK EXTENSION
INPUT LEVEL	0
GAMMA	2.2
AGC	0	OFF
W/B HIGH R
W/B HIGH G	0
W/B HIGH B	0
W/B LOW R	0
W/B LOW G	0
W/B LOW B	0

Press the left or right button to switch between modes.

STANDARD DYNAMIC

MONITOR CINEMA

STANDARD

For viewing in standard (evening lighting) environments. This menu selects the normal levels of BRIGHTNESS and PICTURE.

DYNAMIC

For viewing in brighter environments.

This menu selects higher than normal levels of BRIGHTNESS and PICTURE.

CINEMA

Ideal for movies.

MONITOR

For use when creating broadcast or movie content. With this picture, even if the overall average picture level (APL) changes, the brightness of areas with the same signal level does not change.

Notes:

●When “MONITOR” is selected in PICTURE MENU, the following menu items cannot be set.

PICTURE menu: PICTURE

EXTENDED LIFE SETTINGS: PEAK LIMIT (see page 40)

SET UP menu: POWER SAVE (see page 42)

MULTI DISPLAY SETUP menu: AI-SYNCHRONIZATION (see page 46)

PORTRAIT SETUP menu: AI-SYNCHRONIZATION (see page 49)

●If you would like to change the picture and color of the selected PICTURE menu to something else, adjust using the items in the PICTURE menu. (see next page)

Press the left or right button to switch between modes.

NORMAL COOL WARM

COLOR MANAGEMENT ON

Enables vivid color adjustment automatically.

Helpful Hint ( /

NORMALIZE

Normalization)

While the “PICTURE” menu is displayed, if either the N button on the remote control is pressed at any time or the ACTION () button is pressed during “NORMALIZE”, then all adjustment values are returned to the factory settings.

28