Panasonic 103PF12U manual Color System / Panasonic Auto, Pulldown, XGA Mode

Page 52

SET UP for Input Signals

COLOR SYSTEM / Panasonic AUTO

Select SIGNAL from the “SET UP” menu during VIDEO (S VIDEO) input signal mode. (“SIGNAL [VIDEO]” menu is displayed.)

Press to select the “COLOR SYSTEM” or “Panasonic AUTO (4:3)”.

Press to select each function.

If the image becomes unstable:

With the system set on Auto, under conditions of low level or noisy input signals the image may in rare cases become unstable. Should this occur, set the system to match the format of the input signal.

 

SIGNAL

[ VIDEO ]

 

 

 

 

 

3D Y/C FILTER (NTSC)

ON

 

 

 

 

 

 

COLOR SYSTEM

AUTO

 

 

 

 

 

3 : 2 PULLDOWN

OFF

 

 

 

 

 

 

Panasonic AUTO (4 : 3)

4:3

 

 

 

 

 

Mode

 

 

Function

 

 

COLOR SYSTEM

Set the color system to match the input signal. When selecting “AUTO”, the color system is automatically

 

selected from NTSC/PAL/SECAM, however, M.NTSC signal is not displayed properly depending on

 

the attached terminal board. To display M.NTSC signal, select “M.NTSC” in COLOR SYSTEM.

 

To display PAL60 signal, select “PAL” when BNC Dual Video Terminal Board (TY-FB9BD) is

 

used. For other Video Terminal Boards, select “M.NTSC”.

 

 

AUTO

PAL

SECAM

M.NTSC

NTSC

 

 

Panasonic AUTO

Set to “4:3” to view 4:3 images in an unchanged format when Panasonic AUTO is selected.

(4 : 3 )

If you would like to view 4:3 images in Just format, set to “JUST”.

 

Note:

Panasonic AUTO does not function when BNC Dual Video Terminal Board (TY-FB9BD) is used.

3:2 PULLDOWN

3:2 PULLDOWN: When ON, the display attempts to reproduce a more natural interpretation of sources such as movie pictures, which are recorded at 24 frames per second.

If the picture is not stable, turn the setting to OFF.

Note:

When ON, this setting only affects the following signal input:

•NTSC / PAL signal input during “VIDEO (S VIDEO)” input signal.

•525i(480i), 625i(575i), 1125(1080)/60i signal input during “COMPONENT” input signal.

Press to select “3:2 PULLDOWN”.

Press to set ON/OFF.

3 : 2 PULLDOWN

OFF

XGA MODE

This menu is displayed when the input signal is analog (Component/PC).

This unit supports three types of XGA signals with 60Hz vertical frequency having different aspect ratios and sampling rates (1,024 × 768 @ 60Hz, 1,280 × 768 @ 60Hz and 1,366 × 768 @ 60Hz).

Press to select “XGA MODE”.

XGA MODE

AUTO

 

 

Press to select “AUTO”, “1024×768”, “1280×768”, “1366×768”.

AUTO: Automatically selected from 1024×768/1280×768/1366×768.

Switch the setting to suit the input signal for better display depends on the angle of view or display resolution condition.

Note:

After making this setting, be sure to make each adjustment (such as “AUTO SETUP”) on the “POS. /SIZE” menu as necessary. (see page 25)

52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents High Definition Plasma Display Operating InstructionsModel No. TH-103PF12U EnglishRisk of Electric Shock Do not Open Important Safety Instructions Table of Contents Canadian Notice FCC CautionTrademark Credits Safety Precautions When using the Plasma DisplayMaintenance Safety PrecautionsSetup AC Power Supply CordAccessories Supplied AccessoriesRemote Control Batteries Monitor terminal Secure any excess cables with bands as requiredSee PC Input Terminals connection Signal Names for Mini D-sub 15P ConnectorConnections Signal names for D-sub 9P connector CommandSerial Terminals connection Communication parametersComponent / RGB connection Hdmi connectionDVD Power on / OFF Connecting the AC cord plug to the Plasma DisplayConnecting the plug to the Wall Outlet Right side surfacePower on / OFF When first switching on the unitPresent Time Setup OSD LanguageSelecting the input signal INPUT1 INPUT2A INPUT2B INPUT3 PCBasic Controls Basic Controls On OFFAspect Controls All Aspect modePanasonic Auto Selecting the Display Mode Aspect ControlsDuring PIP During Advanced PIPSwapping Screens During Blend PIP Composite Screen FunctionTransparent Function and Insertion Function Transparent Function Insertion FunctionSelecting the Sub Screen Position During P in P Display Selecting the Target Screen for OperationsOperations on Main screen Sub screen Digital Zoom Display the operation guideSelect the area of the image to be enlarged Select the magnification required for the enlarged displayRemote Control Unit Display the menu screen On-Screen Menu DisplaysSelect the item SetOn-Screen Menu Displays OverviewUsing Remote Control Adjusting POS. /SIZEAuto mode Adjusting POS. /SIZE 2k1k Adjusted as follows For 2k1k signalsOFF On Left On Center On Right Picture Adjustments StandardDynamic CinemaAdvanced Settings Picture AdjustmentsPicture Profiles MEMORY1Saving profiles Picture ProfilesLoading profiles Editing profilesDeleting profiles Note Renaming profilesMemory Edit Locking profilesMemory Save Changing passwords Isf Mode SettingPicture Menu mode display Isf Mode Off Isf Mode OnSound Adjustment SDI Sound OutputSET UP Timer Present Time SetupPower OFF Time Mode selection Start settingScreensaver For preventing image retention Function selectionSetup of Screensaver Time Screensaver For preventing image retentionExtended Life Settings Side BAR AdjustReduces screen image retention Image Retention Reduction MenuExtended Life Settings when profile is locked ResetReduces screen image retention Nanodrift SaverSelect the input to reset the settings AdjustSet each menu Reduces power consumption Customizing the Input labels Selecting the On-Screen Menu LanguageSLOT3 Addition sign Selected InputDisplay Orientation Landscape PortraitSET UP for Multi Display How to setup Multi DisplayDisplay Number locations for each arrangement Examples × 1 2 ×ID Remote Control Function SET UP for Multi DisplayID remote control button operation ID CancellationTransparent Display of the Sub Screen During Blend PIP Sub Screen Insertion During Blend PIPPIP Advanced PIP Blend PIP Insert LevelSET UP for Portrait How to setup PortraitLocation SET UP for PortraitViewing Area Location SET UP for Input Signals Component / RGB in SelectYUV / RGB in Select Component RGBSET UP for Input Signals Signal menu3D Y/C Filter For Ntsc AV images XGA Mode Color System / Panasonic AutoPulldown Color SystemPress to adjust Refresh RateNoise Reduction Advanced NRInput signal display Setting RGB sync signalSync SDI ThroughOptions Adjustments OptionsOptions Adjustments Button lockDelay NormalizationWeekly Command Timer Press Action ButtonShipping condition Troubleshooting Plasma Display panelList of Aspect Modes FullApplicable Input Signals Component / RGB DVI-D in ∗8Applicable Input Signals Video input HdmiMHz Active pixels Pixels Active lines Lines VGA60Command list of Weekly Command Timer ∗1 These commands are unavailable on this modelSpecifications Screen sizePanasonic Professional Flat Panel Display Limited Warranty For the U.S.A and Puerto RicoLimited Warranty Statement For CanadaPage Customer’s Record Panasonic Professional Display CompanyExecutive Office Panasonic Canada Inc
Top Page Image Contents