Panasonic PT-DW5000UL manual Installation, Using a wired remote control, Projection schemes

Page 16

Using the remote control unit

Using a wired remote control

When multiple main units are connected in the system, connect the units with the M3 stereo mini jack cable available in the market to simultaneously control the multiple main units with a single remote control unit through the REMOTE1 IN/OUT terminal. It is effective to use the wired remote control in the environment in which an obstacle stands in the light path or where devices are susceptible to outside light.

 

 

R/PR

G/Y

B/PB

VIDEO IN

S-VIDEO IN

 

 

RGB 1 IN

 

REMOTE 1

REMOTE 2

 

IN

OUT

 

 

Connect to the secondary projector

M3 stereo mini jack cable (available in the

Installation

Projection schemes

Any of the following four projection schemes can be used depending on user’s needs or viewing conditions.

Use “OPTION2” menu (chosen from the MAIN MENU) to choose the appropriate projection scheme (see page 35).

Projection Scheme 2

 

 

Table standing

Ceiling mount

Scheme 1

Front projection

(Default position)

 

Projection

Rear projection

 

 

Installation geometry

After the projector is roughly positioned, picture size and vertical picture positioning can be finely adjusted with the powered zoom lens and lens tilt mechanism.

Side view

market)

With optional ceiling mount bracket (ET-PKD55)

H

L

SH

H

Screen

 

 

64)

 

421-541

(16 37/64-21 19/

180

261

 

(7 3/32) (10 9/32)

 

Attention • Use two-core shielded cable of length smaller than 15 m (49' 2"). If

the cable length exceeds 15 m (49' 2"), or if the shielding of the cable is inadequate, the operation may be unsatisfactory.

L: Projection distance SH : Image height

SW : Image width

H : Distance from center of lens to bottom edge of projected image.

Top view

SW

157

3 16/(6)

314

(1223/64)

 

L

 

 

 

 

87.5 (3 29/64)

 

 

 

Screen

175 (6 57/64)

 

Attention • Do not place or use one projector on top of another projection unit.

Leave a clearance of at least 50 cm so that the ventilation opening on the rear panel will not be blocked.

16

Image 16
Contents PT-DW5000UL Commercial UseDear Panasonic Customer Model number PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000ULPT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Contents Precautions with regard to safety Do not insert any foreign objects into the projector Do not place liquid containers on top of the projectorAlways disconnect all cables before moving the projector Accessories Use only the Specified batteryDo not look into the lens while the projector is being used Do not use the old lamp unitPrecautions on handling Name and function of parts When the operation mode selector Set to ComputerFront and side of the projector Status LED lightsRear view of the main unit Controls on rear panel Side-mounted connection terminals Effective range of remote control operation Using the remote control unitLoading dry cells Using the remote control as a PC mouse Setting projector ID number to remote controlOperation mode selector switch Installation Using a wired remote controlInstallation geometry Projection schemesProjection distance by projection lens PT-D5600U, PT-D5600ULInstallation PT-DW5000U, PT-DW5000UL 817Calculation formulas for projection distance by lens types Setup precautions ConnectionExample of connecting with AV products Example of connecting with PCsMaking adjustment and selection Powering up the projectorProjection Powering off the projector Direct power off functionHow to adjust the lens How to remove the projection lensHow to adjust the lens position to the left or right Choose an item and adjust it using buttonsAutomatic adjustment Auto Setup Using the Freeze functionUsing the Shutter function Using the digital zoom D.ZOOM + functionOn-screen menus Structure of menu screensMenu items setting Resetting to the factory defaultBasic menu operations Returning to the previousAdjusting the picture Adjusting the position TV-SYSTEMSystem PositionZoom Clock PhaseKeystone How to use Advanced Menu Input ResolutionDigital Cinema Reality BlankingSxga Mode XGA ModeRaster Position OPTION1 settings OPTION2 settings Lamp PowerFRONT/REAR DESK/CEILINGPassword FAN CONTROL2System Information FAN CONTROL1Setting the security Setting the network Connecting the PCSystem requirements Connection exampleUsing the serial terminals Pin assignments and signal namesCommunication conditions Factory setting Examples of connectionControl commands Cable specificationsConnecting to a PC Computer Projector DTE specifications Pin assignments and controlIndication of lamp monitor Cleaning and replacement of air filter Procedure of cleaningClean the air filter Dismantle the air filterTiming of lamp unit replacement Replacing the lamp unitLamp unit replacement steps Remove the two screws securing the fan unitLamp unit will be hot after it has been used Have a Phillips screwdriver ready ahead of timeSelect the lamp which has been replaced with the and buttons Using Web Browser Control Accessing from the Web browserPassword change Click OKMail set up button Power On/Off control Shutter controlChange password button Basic controlMonitor information Error informationOK Normal operation Failed Occurrence of trouble Mail setup When Failed has appeared for an item Parameter DescriptionMail setup page Continuing ErrorDNS server set up POP server setupButton to update settings Ping testContents of mail sent Adjust clockNetwork config Network statusUsing the PJLink protocol Supported commandsPJLink security authentication Command Control Description RemarksSymptoms Checks Power doesRemote control Not turn onSpecifications PT-D5600U PT-D5600UL PT-DW5000ULength of power supply cord Cabinet Outside dimensionsRemote control Power source Wireless mouse receiverCompatible Signal List PAL-M/PAL60 PAL/PAL-N/SECAMInstallation dimensions diagram DimensionsTrademark Acknowledgement Concernant LA Sécurité Précautions concernant la sécurité Ne pas couvrir le filtre et la sortie d’airNe pas surcharger la prise de courant Ne pas retirer le couvercle ou le modifierNe pas placer des récipients de liquide sur le projecteur Ne pas placer le projecteur sur des surfaces instablesNe pas mettre d’objets étrangers dans le projecteur ’utiliser que la pile indiquée Ne pas placer d’objets lourds sur le projecteur’utilisez pas un bloc lampe usagé Nettoyage et maintenance Précautions pour la manipulationPrécautions pour le transport Mise au rebutRemplacement de la lampe Période de remplacement de la lampeLa lampe est chaude si elle vient d’être utilisée Procédure de remplacement de la lampePréparez un tournevis Phillips à l’avance INIT. Compt Technical Support Panasonic Projector Systems CompanyPanasonic Canada Inc

PT-DW5000UL specifications

The Panasonic PT-DW5000UL is a cutting-edge projection solution designed for professional use in various environments, including conferences, events, and large venues. Boasting a compact and lightweight design, this projector offers an impressive balance of high performance and portability, making it an excellent choice for users who require mobility without compromising on image quality.

At the heart of the PT-DW5000UL is its powerful DLP technology, which delivers stunning 5000 lumens brightness and a native resolution of 1920 x 1200 pixels. This outstanding resolution ensures that images are sharp, detailed, and vibrant, making it well-suited for displaying high-definition content, intricate graphics, and dynamic presentations. The projector’s high brightness level is particularly advantageous in well-lit environments, allowing for clear visibility even in challenging lighting conditions.

One of the standout features of the PT-DW5000UL is its advanced Solid Shine laser technology. This innovation eliminates the need for traditional lamps, resulting in a longer lifespan of up to 20,000 hours. This increase in operational longevity not only reduces maintenance costs but also ensures consistent performance over time. Moreover, the laser light source provides stable brightness and vivid colors throughout its lifespan, ensuring that every presentation looks its best.

The projector also incorporates a highly effective Dynamic Contrast feature, which enhances the depth of the images by adjusting light output automatically based on the content being displayed. This capability results in deeper blacks and brighter highlights, creating a more immersive viewing experience.

Connectivity is another significant characteristic of the PT-DW5000UL. It supports a wide range of inputs, including HDMI, DVI-D, and 5BNC, allowing seamless integration with various devices. Furthermore, the projector supports multi-screen and edge blending capabilities, making it suitable for large-scale presentations and installations that require multiple projectors to work in harmony.

For ease of installation, the PT-DW5000UL features a variety of lens options and a flexible lens shift range, enabling users to adjust the image position without distortion. This adaptability makes it suitable for different venue configurations, whether in an auditorium or an outdoor setting.

In conclusion, the Panasonic PT-DW5000UL stands out as a robust and reliable projector that combines advanced technology with user-friendly features. Its powerful brightness, exceptional image quality, and long-lasting performance make it an ideal choice for professionals seeking a versatile solution for their projection needs.