Panasonic PT-DW5000UL manual Connection, Setup precautions

Page 21

Connection

Setup precautions

Before connecting any of your video/audio equipment to the projector, carefully read the owners manual supplied with the equipment once again.

All cable connections should be made with the entire system devices, including the projector, first turned off.

Obtain commercial interconnecting cables for devices supplied with no accessory or optional interconnect cables.

Video signals containing too much jitter may cause the images on the screen to randomly wobble or shake. Inserting a time base corrector (TBC) in the projector’s video line will relieve this problem.

The projector only accepts composite-video, S-video, analog-RGB (with TTL sync. level), and digital signal.

Some PC models are not compatible with PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL projectors.

The pin assignments on the S-VIDEO IN terminal are as follows:

Pin No.

Signal

Ground (luminance)

Ground (colour)

Luminance signal

Colour signal

Viewed from mating side

The pin assignments on the RGB2 input terminal are as follows:

Pin No.

Signal

 

R/PR

 

G/G · SYNC/Y

 

B/PB

 

HD/SYNC

 

VD

Viewed from mating side

The pin assignments on the DVI-D input terminal are as follows (interface with DVI-D output terminal on PC):

Viewed from mating side

Pin No.

Signal

Pin No.

Signal

 

T. M. D. S data 2-

 

 

 

T. M. D. S data 2+

 

+5 V

 

T. M. D. S data 2

 

Ground

 

shield

 

Hot plug sense

 

 

 

T. M. D. S data 0-

 

 

 

T. M. D. S data 0+

 

DDC clock

 

T. M. D. S data 0

 

DDC data

 

shield

 

T. M. D. S data 1-

 

 

 

T. M. D. S data 1+

 

T. M. D. S clock

 

T. M. D. S data 1

 

shield

 

shield

 

T. M. D. S clock+

 

 

 

T. M. D. S clock-

Pin : Not used.

Pins - , and : Ground.

The DVI-D input terminal supports single link only.

EDID settings should be performed to suit the DVI equipment being connected. (Page 34)

The DVI-D input terminal can be used to connect to a DVI equipment, but note that images may not appear or the projector may not work properly when connected to certain DVI equipment.

This projector supports HDCP.

21

Image 21
Contents Commercial Use PT-DW5000ULModel number PT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Dear Panasonic CustomerPT-D5600U/PT-D5600UL/PT-DW5000U/PT-DW5000UL Contents Precautions with regard to safety Do not place liquid containers on top of the projector Do not insert any foreign objects into the projectorAlways disconnect all cables before moving the projector Use only the Specified battery AccessoriesDo not look into the lens while the projector is being used Do not use the old lamp unitPrecautions on handling Name and function of parts Set to Computer When the operation mode selectorStatus LED lights Front and side of the projectorRear view of the main unit Controls on rear panel Side-mounted connection terminals Using the remote control unit Effective range of remote control operationLoading dry cells Setting projector ID number to remote control Using the remote control as a PC mouseOperation mode selector switch Using a wired remote control InstallationInstallation geometry Projection schemesPT-D5600U, PT-D5600UL Projection distance by projection lensInstallation 817 PT-DW5000U, PT-DW5000ULCalculation formulas for projection distance by lens types Connection Setup precautionsExample of connecting with PCs Example of connecting with AV productsPowering up the projector Making adjustment and selectionProjection Direct power off function Powering off the projectorHow to remove the projection lens How to adjust the lensHow to adjust the lens position to the left or right Choose an item and adjust it using buttonsUsing the Freeze function Automatic adjustment Auto SetupUsing the Shutter function Using the digital zoom D.ZOOM + functionStructure of menu screens On-screen menusResetting to the factory default Menu items settingBasic menu operations Returning to the previousAdjusting the picture TV-SYSTEM Adjusting the positionSystem PositionClock Phase ZoomKeystone Input Resolution How to use Advanced MenuDigital Cinema Reality BlankingXGA Mode Sxga ModeRaster Position OPTION1 settings Lamp Power OPTION2 settingsFRONT/REAR DESK/CEILINGFAN CONTROL2 PasswordSystem Information FAN CONTROL1Setting the security Connecting the PC Setting the networkSystem requirements Connection examplePin assignments and signal names Using the serial terminalsCommunication conditions Factory setting Examples of connectionCable specifications Control commandsConnecting to a PC Computer Projector DTE specifications Pin assignments and controlIndication of lamp monitor Procedure of cleaning Cleaning and replacement of air filterClean the air filter Dismantle the air filterReplacing the lamp unit Timing of lamp unit replacementRemove the two screws securing the fan unit Lamp unit replacement stepsLamp unit will be hot after it has been used Have a Phillips screwdriver ready ahead of timeSelect the lamp which has been replaced with the and buttons Accessing from the Web browser Using Web Browser ControlPassword change Click OKPower On/Off control Shutter control Mail set up buttonChange password button Basic controlError information Monitor informationOK Normal operation Failed Occurrence of trouble When Failed has appeared for an item Parameter Description Mail setupError Mail setup page ContinuingPOP server setup DNS server set upButton to update settings Ping testAdjust clock Contents of mail sentNetwork status Network configSupported commands Using the PJLink protocolPJLink security authentication Command Control Description RemarksPower does Symptoms ChecksRemote control Not turn onPT-D5600U PT-D5600UL PT-DW5000U SpecificationsOutside dimensions Length of power supply cord CabinetRemote control Power source Wireless mouse receiverPAL-M/PAL60 PAL/PAL-N/SECAM Compatible Signal ListDimensions Installation dimensions diagramTrademark Acknowledgement Concernant LA Sécurité Ne pas couvrir le filtre et la sortie d’air Précautions concernant la sécuritéNe pas surcharger la prise de courant Ne pas retirer le couvercle ou le modifierNe pas placer le projecteur sur des surfaces instables Ne pas placer des récipients de liquide sur le projecteurNe pas mettre d’objets étrangers dans le projecteur Ne pas placer d’objets lourds sur le projecteur ’utiliser que la pile indiquée’utilisez pas un bloc lampe usagé Précautions pour la manipulation Nettoyage et maintenancePrécautions pour le transport Mise au rebutPériode de remplacement de la lampe Remplacement de la lampeProcédure de remplacement de la lampe La lampe est chaude si elle vient d’être utiliséePréparez un tournevis Phillips à l’avance INIT. Compt Panasonic Projector Systems Company Technical SupportPanasonic Canada Inc

PT-DW5000UL specifications

The Panasonic PT-DW5000UL is a cutting-edge projection solution designed for professional use in various environments, including conferences, events, and large venues. Boasting a compact and lightweight design, this projector offers an impressive balance of high performance and portability, making it an excellent choice for users who require mobility without compromising on image quality.

At the heart of the PT-DW5000UL is its powerful DLP technology, which delivers stunning 5000 lumens brightness and a native resolution of 1920 x 1200 pixels. This outstanding resolution ensures that images are sharp, detailed, and vibrant, making it well-suited for displaying high-definition content, intricate graphics, and dynamic presentations. The projector’s high brightness level is particularly advantageous in well-lit environments, allowing for clear visibility even in challenging lighting conditions.

One of the standout features of the PT-DW5000UL is its advanced Solid Shine laser technology. This innovation eliminates the need for traditional lamps, resulting in a longer lifespan of up to 20,000 hours. This increase in operational longevity not only reduces maintenance costs but also ensures consistent performance over time. Moreover, the laser light source provides stable brightness and vivid colors throughout its lifespan, ensuring that every presentation looks its best.

The projector also incorporates a highly effective Dynamic Contrast feature, which enhances the depth of the images by adjusting light output automatically based on the content being displayed. This capability results in deeper blacks and brighter highlights, creating a more immersive viewing experience.

Connectivity is another significant characteristic of the PT-DW5000UL. It supports a wide range of inputs, including HDMI, DVI-D, and 5BNC, allowing seamless integration with various devices. Furthermore, the projector supports multi-screen and edge blending capabilities, making it suitable for large-scale presentations and installations that require multiple projectors to work in harmony.

For ease of installation, the PT-DW5000UL features a variety of lens options and a flexible lens shift range, enabling users to adjust the image position without distortion. This adaptability makes it suitable for different venue configurations, whether in an auditorium or an outdoor setting.

In conclusion, the Panasonic PT-DW5000UL stands out as a robust and reliable projector that combines advanced technology with user-friendly features. Its powerful brightness, exceptional image quality, and long-lasting performance make it an ideal choice for professionals seeking a versatile solution for their projection needs.