Kenwood KVT-920DVD instruction manual Installation for Receiver unit, Removing Monitor Unit

Page 58

Installation

Installation for Receiver unit

■Securing to audio board

1Attach the installation brackets to the sides of the hideaway unit using the sems bolts (M4 × 8 mm).

2Use the tapping screw (ø4 × 16 mm) to secure the hideaway unit to the audio board.

Installation brackets (Accessory K)

(ø4 × 16 mm) (Accessory N)

Sems bolts (M4 × 8 mm) (Accessory M)

■Securing to pile carpet

Peel the protective strips off of the velcro strips, attach them to the bottom of the hideaway unit, and secure to the pile carpet.

2CAUTION
Please do not install the unit near the dashboard, the rear tray, or other
important components. Doing so could lead to injury or accident should
the unit come off due to a shock and strike a person or an important
component.
Tapping screws should be used for mounting. (Attachment with velcro
strips, although easy, can come off with a shock.)	Velcro strips (Accessory L)
	Velcro strips (Accessory L)

Removing Monitor Unit

■Removing the Hard Rubber Frame

1Engage the catch pins on the removal tool and remove the two locks on the lower level.

Lower the frame and pull it forward as shown in the figure.

Lock Catch

Accessory J

2When the lower level is removed, remove the upper two locations.

NOTE

The frame can be removed from the top side in the same manner.

■ Removing the Unit

1 Refer to the section “Removing the Hard Rubber Frame” and then remove the hard rubber frame.

Catch facing up

2 Remove the Hex-head screw with integral washer (M4×6) on the back panel. 3 Insert the two removal tools deeply into the slots on each side, as shown.

4Lower the removal tool toward the bottom, and pull out the unit halfway

while pressing towards the inside.

2 CAUTION

Be careful to avoid injury from the catch pins on the removal tool.

5Pull the unit all the way out with your hands, being careful not to drop it.

58

Image 58

Contents KVT-920DVD Contents External Disc Control Function Before Use Class Laser ProductCleaning the disc slot Region codes in the world Icon DescriptionGlossary Monitor Control Function Power OffSwitching the Monitor’s Picture Opening/ Closing the MonitorSwitching the AV Output Selecting the TV/Video Screen ModeAdjusting the Picture Quality/ Slide Position Adjusting the VolumeMenu Function Setup Menu Function System Setup Function Setting the Information on the Graphic Screen Adjusting the Navigation Sound LevelSetting the On Screen Display Function Selecting the Point Marker TypeAlternative Frequency Function On/Off RDS Setup FunctionNews Bulletin Function with PTY News Timeout Setting RDS Radio Data SystemAuto TP Seek Function On/Off Restricting RDS Region On/OffSetting the Priority Language for Subtitle Setting the Screen ModeSetting the Priority Language for Menu Setting the Angle Mark DisplayScreen Mode 43 LB 43 PS 169 Setting the Optical Output ModeSwitching to the Rating Level parental lock Setting Screen PBCPlayback Control Function On/Off for VCD versionReturning to the Original Language Returning to the DVD setup ScreenInputing the Language Code Audio language onlyList of language codes Code LanguageSetting the password Setting the Parental LevelAdjusting the Time Manually Clock Adjustment FunctionData sent from RDS stations after receiving Adjusting the Touch Position TV Area Setup FunctionSelecting the Preset Bands Selecting the Reception AreaIf you press the Reset button or remove the battery Cancelling the Code Security ScreenWhen using the unit for the first time Code Security FunctionOperating the Buttons for Basic Function Basic Operation for Source Control Screen Selecting the Channels Displaying the TV PictureDisplaying the Information TV Control Function Switching the List Switching to the Name Set ScreenReturning to the Source Control Screen FM/AM Tuner Control Function Selecting the FM Bands Station Preset MemoryTuning Selecting the MW/LM BandSwitching Display for Radio Text Switching to the FM/AM List ScreenSwitching to the PTY Search Screen Turning the Local Seek Function On/OffSeeking to a Different Traffic Information Station Presetting the Volume for Traffic Information/NewsTraffic Information Function Turning TI function On/OffSearching the Selected Programme Type Cancelling the PTY Search ScreenProgramme Type PTY Function Selecting the Type of Programme to be ReceivedPage DVD/VCD Control Function on the Pictures Next Play/ Previous Play Viewing ZoomDisplaying the VCD Picture Track SearchDVD/VCD/CD Control Function Track Random Play Function Pausing and Restarting Disc Play Track Scan FunctionTrack Repeat Function Turning Track Scan Function On/OffTo Scroll Manually Selecting the Name or Title Display for DiscsSelecting the Time Display Making a Forward Track Search External Disc Control FunctionMaking a Reverse Track Search Selecting the Time Display for CDs Disc Repeat FunctionMagazine Random Play Function Making a Forward Disc SearchChanging the Disc List Switching to the Disc List ScreenSwitching the Display for Discs Selecting the DiscWhen you drag in the direction of B Station Name Preset Snps /Disc Name Preset DnpsWhen you drag in the direction of a When you drag in the direction of DSound Effect Menu Function Audio Control Function Adjusting the Centre Frequency of the Bass Switching to the Sound Preset ScreenRecalling the Kenwood Preset Sound Adjusting the Bass Quality FactorSetting the phase for Non-Fading output Adjusting the High-pass filter for Rear outputAdjusting the High-pass filter for Front output Returning to the Sound Effect Menu ScreenChannels Surround Processor Control Function Selecting the Position Mode Setting the Room Size ModeAdjusting the Front Left Speaker Setting the Channel BalanceTest Signal Adjusting the Front Right SpeakerStoring Your Settings of the Crossover network/Delay time Setting the phase for Sub Woofer outputAdjustingoutput the High-pass filter for Centre Switching to the Delay Time Setting ScreenAdjusting the Sub Woofer Delay Time Setting ScreenAdjusting the Quality Factor Selecting the Adjust BandAdjusting the Centre Frequency Adjusting the GainRecalling Your Sound Settings Recalling Your Settings of the Crossover Network/Delay timeQuick Effect Function Monitor Control Function TV or AUD position Remote Control FunctionBasic Source Control Function TV Control Function TV positionExternal Disc Control Function AUD position Cancelling the frame-by-frame playback Press the JoystickDVD/VCD/CD Control Function DVD position Selecting the menu itemInstallation Procedure InstallationAccessories External view Number of itemsInstallation for Monitor Unit Installation for Receiver unit Removing Monitor UnitInstalling the Antenna Units Booster switchConnection Monitor unitFront side Monitor unit Monitor unitConnection for AV Equipments Connection for Disc Changer and Disc PlayerWhen two CD/MD changers are interconnected ExampleTroubleshooting Guide Problem Possible Cause SolutionDVD/VCD/CD External disc control mode Specifications Audio section