Kenwood KVT-920DVD instruction manual Installing the Antenna Units, Booster switch

Page 59

Installing the Antenna Units

•Attach the antenna to the inner glass surface of the rear window using double-sided tape. Carefully check the installation location as the tape can only be stuck on once.

•If the surface temperature of the glass of the rear window is low, warm it by turning on the power of the rear defogger. A cold window glass surface will weaken the adhesive strength of the double-sided tape.

Also, if installation inside the cabin is performed on a day with high humidity or when it is raining, the high humidity level will weaken the adhesive strength of the double-sided tape.

•Do not install the antenna in a location where it may obstruct the field of view during driving, such as on the windshield.

1Check the location where the antenna is to be attached.Clean off any grease or dirt from the installation location using the supplied glass cleaner (Accessory P), clean the area with water and allow to dry.

2CAUTION

Clean the glass thoroughly as failure to clean the glass can not only weaken the adhesive strength of the double-sided tape, but may also cause it to come loose.

2Remove the protective strips from the antenna parts and the back of the antenna unit.

3Attach the double-sided tape of the antenna parts and the antenna unit to the rear windshield glass. Attach the double- sided tape by firmly pressing down from the top. Secure cables using the supplied clampers.

4After attaching the antenna with the double-sided tape, allow it to sit undisturbed for 24 hours. Take care not to apply force to the antenna or allow it to get wet during this time.

5Cable the antenna cable to receiver unit.

Antenna parts

Antenna unit

Bundle cables with the	Rear window
clamper bar

(Accessory Q)

Rear seat

Booster switch

CAR DIVERSITY ANTENNA WITH BOOSTER CX-A330

OFF ON BOOST

OFFON

•Set this booster switch to "OFF" if there is ghosting of the on-screen image due to electromagnetic fields.

•Please set the booster switch to the "ON" position in case of a weaken field area.

59

Image 59

Contents KVT-920DVD Contents External Disc Control Function Class Laser Product Before UseCleaning the disc slot Icon Description Region codes in the worldGlossary Opening/ Closing the Monitor Power OffSwitching the Monitor’s Picture Monitor Control FunctionAdjusting the Volume Selecting the TV/Video Screen ModeAdjusting the Picture Quality/ Slide Position Switching the AV OutputMenu Function Setup Menu Function System Setup Function Selecting the Point Marker Type Adjusting the Navigation Sound LevelSetting the On Screen Display Function Setting the Information on the Graphic ScreenRDS Radio Data System RDS Setup FunctionNews Bulletin Function with PTY News Timeout Setting Alternative Frequency Function On/OffRestricting RDS Region On/Off Auto TP Seek Function On/OffSetting the Angle Mark Display Setting the Screen ModeSetting the Priority Language for Menu Setting the Priority Language for SubtitlePBCPlayback Control Function On/Off for VCD version Setting the Optical Output ModeSwitching to the Rating Level parental lock Setting Screen Screen Mode 43 LB 43 PS 169Audio language only Returning to the DVD setup ScreenInputing the Language Code Returning to the Original LanguageCode Language List of language codesSetting the Parental Level Setting the passwordData sent from RDS stations after receiving Clock Adjustment FunctionAdjusting the Time Manually Selecting the Reception Area TV Area Setup FunctionSelecting the Preset Bands Adjusting the Touch PositionCode Security Function Cancelling the Code Security ScreenWhen using the unit for the first time If you press the Reset button or remove the batteryOperating the Buttons for Basic Function Basic Operation for Source Control Screen Displaying the Information Displaying the TV PictureSelecting the Channels TV Control Function Returning to the Source Control Screen Switching to the Name Set ScreenSwitching the List Selecting the MW/LM Band Selecting the FM Bands Station Preset MemoryTuning FM/AM Tuner Control FunctionTurning the Local Seek Function On/Off Switching to the FM/AM List ScreenSwitching to the PTY Search Screen Switching Display for Radio TextTurning TI function On/Off Presetting the Volume for Traffic Information/NewsTraffic Information Function Seeking to a Different Traffic Information StationSelecting the Type of Programme to be Received Cancelling the PTY Search ScreenProgramme Type PTY Function Searching the Selected Programme TypePage DVD/VCD Control Function on the Pictures Track Search Viewing ZoomDisplaying the VCD Picture Next Play/ Previous PlayDVD/VCD/CD Control Function Turning Track Scan Function On/Off Pausing and Restarting Disc Play Track Scan FunctionTrack Repeat Function Track Random Play FunctionSelecting the Time Display Selecting the Name or Title Display for DiscsTo Scroll Manually Making a Reverse Track Search External Disc Control FunctionMaking a Forward Track Search Making a Forward Disc Search Disc Repeat FunctionMagazine Random Play Function Selecting the Time Display for CDsSelecting the Disc Switching to the Disc List ScreenSwitching the Display for Discs Changing the Disc ListWhen you drag in the direction of D Station Name Preset Snps /Disc Name Preset DnpsWhen you drag in the direction of a When you drag in the direction of BSound Effect Menu Function Audio Control Function Adjusting the Bass Quality Factor Switching to the Sound Preset ScreenRecalling the Kenwood Preset Sound Adjusting the Centre Frequency of the BassReturning to the Sound Effect Menu Screen Adjusting the High-pass filter for Rear outputAdjusting the High-pass filter for Front output Setting the phase for Non-Fading outputChannels Surround Processor Control Function Setting the Room Size Mode Selecting the Position ModeAdjusting the Front Right Speaker Setting the Channel BalanceTest Signal Adjusting the Front Left SpeakerSwitching to the Delay Time Setting Screen Setting the phase for Sub Woofer outputAdjustingoutput the High-pass filter for Centre Storing Your Settings of the Crossover network/Delay timeDelay Time Setting Screen Adjusting the Sub WooferAdjusting the Gain Selecting the Adjust BandAdjusting the Centre Frequency Adjusting the Quality FactorQuick Effect Function Recalling Your Settings of the Crossover Network/Delay timeRecalling Your Sound Settings TV Control Function TV position Remote Control FunctionBasic Source Control Function Monitor Control Function TV or AUD positionSelecting the menu item Cancelling the frame-by-frame playback Press the JoystickDVD/VCD/CD Control Function DVD position External Disc Control Function AUD positionExternal view Number of items InstallationAccessories Installation ProcedureInstallation for Monitor Unit Removing Monitor Unit Installation for Receiver unitBooster switch Installing the Antenna UnitsMonitor unit ConnectionFront side Monitor unit Monitor unitConnection for Disc Changer and Disc Player Connection for AV EquipmentsExample When two CD/MD changers are interconnectedProblem Possible Cause Solution Troubleshooting GuideDVD/VCD/CD External disc control mode Audio section Specifications