Panasonic PV-DM2792 manual Anual Clock Set, Press, Reset all unit Memory Functions Initial

ortant: If a remote control button does not work when pressed, press the button on the remote and try the button again.

anual Clock Set

UTO CLOCK SET was incomplete, manually the clock as follows.

Press ACTION on the Remote to display SET CLOCK Menu screen.

			SET CLOCK
1 /	/	:
				DST : ON
	SELE CT MONTH
	SELECT :
	SET		: SET
	END		: ACT I ON
Press			to select the month

and press SET to set. In the same manner, select and set the date, year, time, and DST. (Daylight Saving Time)

		SET CLOCK
	2 /	6/2002 WED 12:00PM
			DST : ON
SET COMPLETED
SET		: SET	BACK:
START		: ACT I ON

Reset all unit Memory Functions	Initial
• Make sure a tape is not inserted in the unit.
When moving unit to a new location, or if a
mistake was made in the Initial Setup section.
	Setup

1 Turn the unit Power on.

2 Press and hold both PLAY and

FFon the unit for more than 5 seconds.

•The power will shut off.

•Please ignore “NO CASSETTE” warning.

3 Do “Initial Setup” on page 14.

Press ACTION twice to start

CLOCK and exit.

Note to CABLE System Installer

This reminder is provided to call the CABLE (Cable TV) System Installers attention to Article 820-40 of the NEC that provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be connected to the grounding system of the building, as close to the point of cable entry as practical.