Panasonic PV-DM2792 manual Program End Search

*Important: If a remote control button does not work when pressed, press the button on the remote and try the button again.

Program End Search

Locates end point of recording for continuity.

1Press SEARCH twice in Playback or Stop mode to display PROGRAM END SEARCH screen .

2 PROGRAM END SEARCH

SEARCH START:FF

EXIT : SEARCH

Press FF

to start search.

To cancel,

press PLAY or STOP.

Example of Program End Search operation.

Fig.1				PLAYBACK DIRECTION
		Program 1			INDEX		Program 2 or BLANK
Press		SEARCH button
							End Point
Fig.2			FF
					INDEX
	Program 1			BLANK			Program 2	BLANK
Press SEARCH button								End Point
						FF

Fig.3 If search exceeds a few seconds in BLANK area.

Press SEARCH button

Program 1 BLANK INDEX Program 2

FF

End Point

Upon locating end point...

The unit searches slightly past end point, reverse searches, and plays the last few seconds of the program, then stops.

Press SEARCH button

Note

•If Program End Search is started very close to an index mark, that mark may be skipped over.

Advanced Operation

35