Panasonic PV-DM2792 manual To Replace program

*Important: If a remote control button does not work when pressed, press the button on the remote and try the button again.

Cancel a Timer Recording: (Recording is in progress)

Hold down STOP for a few seconds to cancel the Timer Recording.

•Any future daily or weekly recordings will be performed as programmed.

Review, Replace or Clear Program Contents : (Recording is not in progress)

1 Repeat steps 1 and 2 on page 30.

2		P DT START STOP					CH SPD		Press	to select
		1 day			9 : 00p12 : 00a 08			SP	the desired program.
		2	8		10 : 00a12 : 00p 125			SP
	3		10		8 : 00p 9 : 00p 10			SP
	4			SU	9 : 00p10 : 00p L LP
			CANCEL : ADD / DLT
			SELECT 1 - 8 :
			ENTER : SET
			END		: PROG
3	To Replace program...
		DATE			START STOP			CH 1) Press SET to display.
			8 SAT 9:00P 12:00A					08	2) Press	to select
		TODAY						SLP	and press SET or
	------------------------
		SELE CT START DATE							to set new
		SELECT :
									program contents.
		SET			: SET	BACK :
		END			: PROG				3) Press PROG.
	To Clear program...
											Timer
	1 -- -- : -- -- : --					--		--	Press ADD/DLT.
		P DT START STOP					CH SPD
		2		8 10 : 00p12 : 00a 125				SP			Operation
	3		10		8 : 00p 9 : 00p 10			SP
	4			SU	9 : 00p10 : 00p L LP
		SELECT 1 - 8 :
		ENTER : SET
		END			: PROG

4 Press PROG twice to exit this mode.

Notes

•2 minutes before Timer recording is performed, “PLEASE PREPARE FOR TIMER REC” appears and/or the PROG TIMER Indicator flashes.

Be sure a cassette with record tab is loaded and the unit is in Stop mode.

•If the start times of two programs overlap, the lower numbered program will have priority.

•If the start time for a Timer Recording comes up during a normal recording or One Touch Recording (page 18), the Timer Recording will not be performed.

•If there is a power interruption of more than one minute, the recording may not be performed or continued.

•If “INCOMPLETE” appears after all items have been set, check all entries and make necessary corrections.

31