DVD/Video CD/CD | Correction |
Play fails to start even when | • This unit cannot play discs other than DVDs, Video CDs and |
PLAY is pressed... | CDs. |
| • The disc may be dirty and require cleaning. |
|
|
Play starts but then stops | • Be sure disc is installed with label side up. |
immediately... |
|
|
|
Picture is distorted during rapid | • The picture will be somewhat distorted at times: this is normal. |
advance or rapid reverse... |
|
|
|
No Forward/Reverse search | • Some discs may have sections which prohibit Forward/ |
play... | Reverse search. (P. 21) |
|
|
Play does not start even when | • Confirm the “DVD LOCK” setting. (P. 56) |
title is selected... |
|
|
|
Audio soundtrack and/or | • If the audio soundtrack and/or subtitle language selected at |
subtitle language is not the one | DVD initial settings does not exist on the disc, it will not be |
selected at the initial settings... | accessible. |
|
|
No subtitles... | • Subtitles appear only when available on disc. |
| • Select “ON” at the “Subtitle Language” section (P. 48) |
| to display subtitles. |
|
|
Alternative audio soundtrack | • Alternative language cannot be selected with discs which do |
(or subtitle) language cannot | not contain more than one language. |
be selected... | • For some discs, alternative language cannot be selected with |
| the AUDIO or SUB TITLE button. Try selecting it from the DVD |
| menu if available. |
|
|
Angle cannot be changed... | • This function is dependent on software availability. Even if disc |
| has multiple angles, they may be recorded for specific scenes |
| only (ANGLE Indicator on unit lights up). (P. 49) |
|
|
Miscellaneous | Correction |
Video cassette cannot be | • Insert the cassette window side up; record tab facing you. |
inserted... |
|
|
|
Video cassette cannot be | • Completely insert Power Plug into an AC outlet. |
removed... |
|
|
|
Eject does not function or | • Turn the POWER off and then on, and try ejecting or inserting |
insertion cannot be done... | the tape again. |
|
|
Video cassette ejects when a | • Make sure cassette record tab is intact. (P. 4) |
recording is started, or the |
|
power is turned off for timer |
|
recording... |
|
|
|
The disc cannot be removed... | • First, unplug unit. Then, prepare a rigid wire (e.g. an extended |
| paper clip, etc.) and, applying moderate force, insert it straight |
| into the hole at the base of the tray. The tray will eject a little. |
| Now, pull the tray all the way out and remove the disc. (P. 9) |
|
|
In Stop mode, the VCR motor | • To enable Quick Play mechanism, the VCR cylinder will rotate |
(CYLINDER) continues to | for about 3 minutes. This reduces response time from Stop to |
rotate... | Play mode and from Play to Rewind Search mode. |
|
|
If you cannot resolve the problem, please call the Customer Call Center for product assistance at
To locate an authorized servicenter, please call toll free
61