Cable Box Universal Remote Control Feature
Universal Remote Control is...
The Remote Control may be set up to control some basic DSS or Cable box functions.
The Universal Remote Control Setup
1Find your DSS box or Cable box
Brand Code Number from one of the charts on the next page.
2 Setup remote.
Hold down DSS CABLE and press number keys to enter code.
• If code number is 100 or greater, e.g., press 1 - 0 - 2 for 102.
3 Confirm code entry.
Press POWER* to turn selected unit
ON or OFF.
• See below for controllable functions in each mode.
Notes
• Please repeat the Universal Remote Control Setup after replacing remote control batteries.
• The remote control will not operate all DSS receivers or Cable Boxes made by the manufactures listed.
If you get no results, your particular brand cannot be controlled.
Using the Universal Remote Control
(Available Buttons / Functions)
Once the remote control has been properly set up, you can select
Press 
, FM, DVD or DSS CABLE on the remote control to select the desired mode. (See below for buttons available in each mode.)
Set to 
, FM, DVD:
All TV functions, as well as functions of
Set to DSS CABLE:
•Basic VCR functions, e.g. PLAY, REC, etc.
•CABLE/DSS function, e.g. POWER, ENTER, NUMBER keys (except 100 key), CH UP/DOWN.
32
For assistance, please call :