Panasonic PV-DM2792 manual Tape Operation, Index Search, Search System is

Tape Operation

Search System is ...

Each time a recording is made, an invisible index mark is placed on the tape. When timer recordings are made, program index and information are also included. These index marks can be used to access or scan recordings.

Index Search

Go directly to the desired recording.

1 INDEX SEARCH ENTER INDEX NUMBER:1 US I NG 1-9 KEYS

FORWARD SEARCH:FF

REVERSE SEARCH:REW

NEXT : SEARCH

EX I T : STOP

Press SEARCH*

in Playback or Stop mode to display INDEX SEARCH screen, and then press NUMBER Keys to select the recording number.

•To calculate number, see below.

		Press FF or REW
		to start search.
2	INDEX SEARCH	Play begins at
		search end. To
		searchforwardor
		back 1 index,
	FORWARD SEARCH:FF	press FF or REW
	REVERSE SEARCH:REW	while screen left in

displayed (10 sec.).

To cancel, press PLAY or STOP. REW

FF

To calculate the Index Number

Example 1:

To go to rec. 2 from rec. 4, enter 3 and press REW.

1 2 3 4 5 6 7

Example 2:

To go to rec. 6 from rec. 2, enter 4 and press FF.

1 2 3 47 5 6 7

NOTE: indicates start points of each recording.

Notes

•Make each entry within 5 minutes, or the Index Search mode will be canceled.

•If Index Search is started very close to an index mark, that index mark may not be counted in the search.

34

For assistance, please call : 1-800-211-PANA(7262) or send e-mail to : consumerproducts@panasonic.com