Panasonic TC 22LR30 manual Sound Recording, Timer Recording

Sound

Recording, Timer Recording

PROBLEM	CORRECTION	Page
No sound...	• Make sure your antenna system (TV or CABLE) is correctly set.	15
Low volume...	• Check the connections. Check the input mode on the amplifier if you have connected	16~20
Distorted sound...
	one.
	• Turn SURROUND off if it causes distortion.	31
Cannot hear the desired audio type...	• Press AUDIO to select the desired audio type.	48
	• If “D.MIX” does not appear in the display when playing multi-channel DVD-Audio, audio	13
	output will be the front two speakers only.
	• You cannot change the DVD-Audio audio type if the software producer has restricted	–
	play in stereo.
	• Turn off SURROUND in the following cases.	31
	- When using discs that do not have surround sound effects such as Karaoke discs.
	- When playing MTS broadcast programs.
Cannot switch audio...	• You have used digital connection. Set “Dolby Digital" to “PCM" or connect to other	18, 69
	equipment using audio cables (analog connection).
	• It is not possible to switch the audio when the recording mode is XP and “LPCM” has
	been selected in the SETUP menu, “Audio for XP Recording”.	69
	→ Select “MAIN” or “SAP” from “Select MTS” in the Audio menu before recording.
	• There are discs which audio cannot be changed because of how the disc was created.	–
Cannot record...	• You haven’t inserted a disc or the disc you inserted cannot be recorded on. Insert a disc	9
	the unit can record onto.
	• The disc is unformatted. Format the disc. RAM	61
	• The write-protect tab on the cartridge is set to “PROTECT” or the disc is protected with	9, 61
	“DISC SETTING”.
	• Some programs have limitations on the number of times they can be recorded (CPRM).	38
	• The disc is full or nearly full. Erase unneeded titles or use another disc.	55
	• You cannot record on finalized DVD-R discs.	–
	• If you repeatedly insert discs or turn this unit on and off 50 times or more, the recording	–
	or editing of DVD-R may be disabled.
	• The material you are trying to record is copy-guarded.	–
	• Timer recording will not be activated when in editing or transfer (dubbing). Timer	–
	recording will begin after the editing/transfer (dubbing) is finished.
	• You cannot record the COMPONENT and HDMI signals.	16, 17
A part or whole of a recorded title has been	• If the power shuts down or the plug is disconnected from the household AC outlet while
lost...	recording or editing, the program may be lost or the disc may become unusable.	–
	→ We cannot offer any guarantee regarding lost titles or discs. You will have to format
	the disc ([RAM]) or use a new disc.
Timer recording does not work properly...	• When connected to cable TV box or satellite receiver, the VCR Plus+ system does not	–
VCR Plus+ system does not work properly...	work.
	• The timer program is incorrect or different timer program times overlap. Correct the	41
	program.
	• The clock is not correct. Set the clock.	23
	• Correct the guide channels with “VCR Plus+ CH Setting” in the PROGRAM CHANNEL	24
	menu.
	• The same guide channel is set to 2 or more channel positions. Set the guide channel	24
	correctly or delete unnecessary channels.
	• Timer recording will not be activated during formatting, transfer (dubbing) and other	–
	such operations which should not be interrupted when they are being carried out.
Timer recording does not stop even when	• Press and hold STOP for a few seconds to turn “ ” off. Recording stops.	40, 41
STOP is pressed...
The timer program remains even after	• The timer program remains if set to daily or weekly.	41
recording finishes...
Strip-shaped black noise is recorded...	• The device in playback is interfered with by the TV because the device is too close to	–
	the TV. Move the device away from the TV.
Cannot record video or sound from the	• The external device is not correctly connected.	16~20
external device...	• The proper external input channel (L1 or L2) is not selected.	43

Information

73