transmitter/receiver learn routine
The system comes with one transmitter that has been taught to the receiver. The receiver can store up to 4 different transmitter codes in memory. Use the following learn routine to add trans- mitters to the system or to change button assignments if desired.
The Program switch, plugged into the blue port, is used for program- ming. There is a basic sequence of steps to remember whenever programming this unit: Key, Choose, Transmit and Release.
1. Key. Turn the ignition to the ON position.
2. Choose. Within 10 seconds, press and release the Program switch the number of times corresponding to the desired channel listed below. Once you have selected the channel, press the switch once more and hold it. The LED will flash to confirm the selected channel. Do not release the Program switch.
|
| Channel number | Function |
| |
|
|
|
|
|
|
| 1 | Lock/Unlock |
| ||
|
|
|
|
|
|
| 2 | Timer Mode |
| ||
|
|
|
|
|
|
| 3 | Remote Start |
| ||
|
|
|
| ||
© 2002 directed electronics, inc . | 29 | ||||