While the vehicle is running during remote start operation, the system will monitor the vehicle and will automatically shut down the engine if the system receives any of the following shut- down inputs:
➤The brake pedal is pressed.
➤The hood is opened.
➤The shutdown toggle switch is put into the ON position.
➤The
➤Buttons 
and 
are pressed again.
To shut down the remote start and turn off the engine:
➤Step on the brake pedal, or
➤Press 
and 
for one second.
➜
timer mode
Timer Mode automatically starts the engine and runs it for a
important! This feature must only be used in open areas, never in an enclosed area such as a garage.
To enter Timer Mode:
1.Start the vehicle by pressing and releasing 
and 
.
2.Press and release 
.
3.Within two seconds press and release 
and 
again.
© 2002 directed electronics, inc . | 33 |