Cambridge Audio DV30 user manual Hdmi connections, TV or Monitor with Hdmi input Hdmi cable

DV30

HDMI connections

HDMI (High-Definition Multi-Media Interface) is a digital connection that can carry both audio and video in one cable. Direct digital transfer of video and support for various types of High Definition video content make this the best connection type for picture quality.

As HDMI can carry both digital audio and video, HDMI can also be used to connect to AV receivers that support this function to allow decoding of surround-sound, etc. In the diagram at right, option 1 shows direct connection to a TV while option 2 shows connection via a surround-sound receiver with HDMI In/Out.

DVI (Digital Video Interface) output can be supported simply by using DVI-to-HDMI adaptors as these two connection types are compatible. When using DVI, only video will be passed to the TV or monitor. A separate analogue or digital audio connection would then need to be made from the DV30 to the AV receiver or TV.

TV or Monitor with

HDMI input

1

HDMI cable

On Off

Power AC

	Trigger In
Y	Composite
			2.1 Channel Audio Out
	12V @ 30mA		SW	L
	Tip +ve	Digital
Cb/
		Outputs
Pb
Cr/
Pr
Component	S-Video	Toslink	S/P DIF	R
	SCART (Composite/RGB/Stereo Audio)	Optical	Co-axial
Video Out

ENGLISH

TV or Monitor with	AV receiver
HDMI input	Out

2

HDMI cable

*

OR

AV receiver

*If your AV receiver can switch HDMI but not receive audio in this way, an additional SPDIF or TOSlink cable will be required.

1Direct connection to a TV

2Connection to a TV via an AV receiver

15