DivX/MP4 playback

If a disc (CD or DVD) containing DivX/MP4 files is loaded, the DV30 will detect these file types and show a special folder navigation screen as below:

. .

FILE 1

FILE 2

FILE 3

FILE 4

Navigate the folders using the navigation arrows () to highlight the desired movie clip. Press Play or Enter to start playback of that file.

Note: If there are multiple DivX/MP4 files in one folder, you can select them directly by pressing the relevant numerical keys, including 10+ for numbers greater than ten.

During playback the Play, Pause, Stop and Forward or Reverse Scan buttons work as for CD/DVD.

DivX Video On Demand

The DV30 is able to playback DivX encoded content downloaded to a PC from suitable websites, and then burnt to a disc for playback in the unit. To enable this service your DV30 needs to be activated and registered with DivX as explained below. See www.divx.com for more details about the DivX VOD service in general.

DivX VOD registration

To enable DivX Video On Demand playback for the DV30, you have to first register the device (DV30) through the DivX Player Programme on your PC.

The procedure is as follows: launch www.divx.com in an internet browser on your PC and then select the ‘Free Download’ button on the website to install the DivX Player Program (version 6.8 is the latest at the time of writing).

Once installed open the DivX Player Program and go to Tools — Device Manager — Register Device. Then follow the on-line instructions where you will be asked for a DivX Video On Demand Registration Code (or ID).

This is the code unique to each DV30. Your code can be found in the DV30’s ‘Preference Page’ menu under ‘DivX VOD’.

-- Preference Page --

Audio	ENG
Subtitle	ENG
Disc Menu	ENG
Parental
Password
Default

DivX VOD		OK

DivX VOD

Using the right cursor of the remote control, highlight OK (Yellow) and press Enter to view the Registration Code. Make a note of this Code and then press Enter (OK) to

finish.