Cambridge Audio DV30 user manual Rear panel connections, Power On/Off Hdmi Out, AC power socket

Rear panel connections

On

1		4	Trigger In
Power						8
		Y	Composite
Off	Designed and engineered in London, England				2.1 Channel Audio Out
	Sonata DV30			7
	DVD Player		12V @ 30mA		SW	L
	Power Rating: 100-240V AC ~ 50/60Hz		Tip +ve	Digital
	Max Power Consumption: 15W	Pb	6
		Cb/		Outputs
Power AC	www.cambridge-audio.com		5
	3
2		Cr/
		Pr
		Component	S-Video	Toslink	S/P DIF	R
	HDMI Out		SCART (Composite/RGB/Stereo Audio)	Optical	Co-axial
		Video Out

1	Power On/Off	3 HDMI Out
Switches the unit on or off.		HDMI (High-Definition Multi-Media Interface) is a purely digital connection that can
		carry both audio and video. Use a dedicated HDMI cable to connect to a TV or monitor
2	AC power socket	with a compatible HDMI input.

Once you have completed all connections, plug the AC power cable into an appropriate mains socket then switch on. Your unit is now ready for use.

Note: The preferred connection method for video sources is always HDMI (highest quality, and can also carry audio in some circumstances), then Component Video, RGB/SCART, S-Video, and Composite Video (lowest quality). The HDMI and Component outputs also support Progressive Scan which gives better picture quality if supported by your TV.

4Analogue Video Outputs

Composite – Connect to your television via 75ohm RCA/phono cable designed specifically for video use.

S-Video– Connect to your television via dedicated S-Video cable.

Component – Connect to the YCbCr or YPbPr terminals (often coloured Red-Green- Blue) of a television set via three 75 ohm RCA/phono cables designed specifically for video use.

Note: Component is enabled by default – 720p (50Hz) for PAL, or 720p (60Hz) for NTSC.

8