Video setup menu, Video Setup Menu | Cambridge Audio DV30 guide

DV30

Running along the top of the screen are icons that represent the four main menu sections:

Video Setup

Audio Setup

Dolby Digital Setup

Preference Setup*

* Note: To enter the Preferences menu, the unit must first be in Stop mode.

Press Setup to enter the menu system. Use the Navigation arrows () on the

remote to highlight the icon at the top of the screen for the main menu you want to select and then press either Enter or to go into that menu and select its first sub-

menu. You can now navigate to each sub-menu item you might want to change using , and then to select settings.

The yellow highlight always shows the menu or setting you have navigated to, the orange/brown highlight shows the current setting that is being used. Pressing Enter stores a highlighted setting as the new one to use. To navigate out of a sub-menu, press to move to the sub-menu list if necessary and again to move back to the main menu list. You can now use to select a new main menu.

Note: Some setup is inter-related with other setup items and if the enabling of one function automatically disables another, the disabled function will appear grey and cannot be set.

Press Setup to exit the menu system. All setup is saved on exiting the menus and is saved even if the unit is powered off.

Video setup menu

-- Video Setup Menu --

TV Display	PS
TV Type	PAL
Scart / Component	Comp
Angle Mark	On
OSD Lang	ENG
Screen Saver	On
HDMI Resolution

Go To Video Setup Menu

With the Video setup menu selected, use the and arrows to move up or down to the desired sub-menu. Use the navigation arrows () to adjust the settings and press Enter to confirm your selection. The following list overleaf shows the Video Setup menu structure:

ENGLISH