Video setup menu (continued)
Important Note
Some TVs may have occasional problems re-acquiring an HDMI signal (no picture or incorrect colour balance appears) when an HDMI setting is changed on the DVD player.
Should this happen, simply re-select the default HDMI Resolution via the DV30's Video Setup menu:
Angle Mark
For DVDs recorded with multi-angular scenes, you can change the angle of the screen. There are two modes in the Angle Mark setting: ‘On’ and ‘Off’. When set to ‘On’, the current playing angle number is displayed in the top right hand corner of the TV screen. When set to ‘Off’, no angle mark number is displayed on the TV screen.
Note: The angle number differs from disc to disc or from scene to scene.
Press Angle on the remote control to switch between multi-angles.
-- Video Setup Menu --
TV Display | PS |
TV Type | PAL |
Scart / Component | Comp |
Angle Mark | On |
OSD Lang | ENG |
Screen Saver | On |
HDMI Resolution | |
HDMI Resolution
Off 480p(60Hz) 720p(60Hz) 1080i(60Hz) 1080p(60Hz) 576p(50Hz)
720p(50Hz)
1080i(50Hz)
1080p(50Hz)
OSD Language
There are seven language modes to select from: English, Spanish, German, French, Italian, Dutch and Danish.
Screen-Saver
If you activate the screen-saver function, a screen-saver picture will appear when the unit is stopped, the disc tray is open or there is no disc, or the picture is still for about 60 seconds. The purpose of this screensaver is to reduce the risk of image retention (screen burn) caused by a static image. Image retention can affect all TV types; however, plasma TVs are particularly susceptible to this problem.
Note: The default setting is ‘On’.
This allows your TV to re-acquire the signal and for normal operation to resume.
