Sharp MD-MT888H operation manual „ Long-play recording, Start recording, To interrupt recording

Page 29

MD-MT888H

To interrupt recording

zWhen the stereo system is stopped, the unit will enter the synchro recording pause mode. When playback is resumed, the recording will be resumed.

zIf a silence lasts for 3 seconds or more, the recording will be paused (pause function does not work for approximately 10 seconds after a recording starts). When the unit receives sound again, recording auto- matically starts.

zA new track number is created when the recording resumes.

„Long-play recording

2 times and 4 times long recording

Double or quadruple time of stereo recording is possible.

Monaural recording

In monaural, you can record twice as long as the stereo recording.

A track recorded in monaural can be played back in dou- ble speed, see page 27.

1 When a recording is paused, press the MODE button repeatedly to select the re- cording mode.

Each time the button is pressed, the display will change as follows.

2 Start recording.

The recording mode remains unchanged until a new mode is selected.

Useful Features -Advanced Recording-

29

01/8/30 4.fm

Image 29

Contents MD-MT888H Remote control x 1 Earphones x AC adaptor Battery carrying AccessoriesBattery charger x 1 Connection cable Carrying bag x Case x El-metal hydrideContents „ Caution „ WarningsSpecial Notes „ NotesPrecautions PrecautionsAvoid using or leaving the unit in the following places „ Important„ Main unit Names of Controls and IndicatorsImportant Introduction -Names of Controls and Indicators Battery Indicator „ Remote control unitReference Earphones SocketMenu display Menu button operationIf you move the M button toward If you press the M button„ Charging Using with the Rechargeable BatteryPreparation -Using with the Rechargeable Battery Refresh „ Display of remaining amount of battery„ Charging time Preparation -Using with the AC Adaptor Using with the AC AdaptorInserting a MiniDisc Using with the Alkaline BatteryConnections MD-MT888HConnectionsPreparation „ Long time recording MD-MT888HLong Time Recording and Group Recording„ Group recording LongWhen the group mode is cancelled Group goes out When the group mode is selected Group lights upGroup Playback „ Playback of group-recorded MDBasic Operation -Recording Move the M button toward Recording„ Recording level To update the recorded contents of the MiniDiscTo interrupt recording To stop recordingAbout the TOC „ Adding tracks to an existing groupBasic Operation -Playback To turn off the power „ 3-colour indicatorsStart playback by moving the M button to- ward To interrupt playback„ Bass control „ Volume control„ To search a desired group Press the Group button so that the Group flashesAdvanced Playback Useful Features -Advanced Playback„ To locate the desired portion „ To locate the beginning of a track „ Random play or repeat play „ To play at double speed „ Intro playAdvanced Recording Useful Features -Advanced Recording„ Playback sound-actuated recording Hold down the REC button for 2 seconds or moreStart recording „ Long-play recordingTo interrupt recording Times and 4 times long recordingIndication Recording mode „ About the recording mode„ About Atrac „ Caution for 4 times long recording LP4„ Recording tracks as a single track „ To create your own track numbersMmark and press it Move the M button Toward To and press it„ About track numbers „ Note for digital recording „ Helpful tip when attaching a label„ About sampling rate converter „ To record from a microphone Useful Features -Recording from a MicrophoneMD-MT888HRecording from a Microphone Move the M button toward or to ad- just the recording level To write recorded contents on the MiniDisc„ Sound-actuated recording Mic Syn Chronised recording MD-MT888HRecording from a MicrophoneDuring a mic manual recording „ Track intervalsDuring a mic synchro recording Creating track numbers manually„ To display the playing time of an indi- vidual track Checking DisplaysChecking Displays „ Checking the remaining amount of bat Tery level Titling a MiniDisc Titling a MiniDisc„ Creating a disc name Whilst in the stop mode, press the M button„ Creating a track name „ Creating a group nameEnter the characters page 40, steps 4 Or to select Nname and press it Press the M button„ To erase a character „ Characters symbols„ To add characters „ To enter a space„ To erase one track at a time Editing a Recorded MiniDisc„ To erase all of the tracks at once Editing a Recorded MiniDisc„ To divide a track „ To move a track When a track has a name before dividingTion the track is moved to Total number of tracks that can be divided„ To combine tracks When one or both tracks to be combined have a NameTo combine two non-adjacent tracks Following cases, tracks may not be combinedMoved to „ Moving a track to another groupSelected group will be erased What is a MiniDisc for stamping? What is a master MiniDisc?„ Stamping titles from another MiniDisc Before stampingOperation of the MiniDisc for stamping „ Creating a group before recording„ Erasing group information „ Moving non-group tracks to afterHold Function Advanced Features -Hold FunctionTo cancel the hold mode Menu Changing Default SettingsChanging Default Settings What is auto power save function? „ Auto power save„ Beep sound „ Auto play„ Listening through a stereo system MD-MT888HListening through Another SystemAnother System Listening throughReferences -Other Features and Caution Other Features and Caution„ Resuming auto play „ Rechargeable battery Troubleshooting MD-MT888HTroubleshooting„ If trouble occurs If such a problem occurs, do the following„ Moisture condensation To remove condensationMD-MT888HMiniDisc System Limitations Error MES Meaning Sages Blank Error MessagesLocked Error Messages„ Cleaning MaintenanceMD-MT888HError When the unit becomes dirtySpecifications MD-MT888HSpecificationsInput sensitivity Sharp Corporation