Sharp MD-MT888H operation manual Error Messages, Locked

Page 60

MD-MT888H

Error Messages (continued)

References	-Error Messages-

ERROR MES-	MEANING
SAGES

G-FULL	z The total number of groups exceeds
	99.
	(Erase unnecessary groups.)

HOLD	z The unit is in the hold mode.

LoBATT	z The rechargeable or alkaline battery
	has run down.

LOCKED	z You removed a MiniDisc whilst record-
	ing or editing.
	(Turn off the power before removing the
	MiniDisc.)

N-FULL	z The number of a disc, group, or track
	name exceeds 40.
	(Shorten the name.)

NoDISC	z A disc has not been loaded.

noSIG.	z Poor connection of the digital cable.
	z No output signal comes out from the
	connected unit to playback.
	(Use the AC power for the connected
	unit.)
	z The input signal has improper sam-
	pling frequency.

ERROR MES-	MEANING
SAGES

NoTRACK	z There is no track to be played.

PLAYmd	z You tried to record on a playback-only
	disc.

POWER ?	z The battery charger is defective.

PROTECTED	z The write protection tab of a MiniDisc
	is set to the protected position.

Sorry	z Since a track number is currently be-
	ing located or updated, the unit cannot
	accept your command.
	(Wait for a while and try the operation
	again.)

T Form (*)	z There is an error in the recording sig-
	nal.
	(Erase all of the tracks, and then record
	again.)

T-FULL	z There is no space left for recording
	character information (track names,
	disc names, etc.).

TEMP!	z The temperature is too high.
	(Turn off the power, and wait for a while.)

Number or symbol appears in (*) position.

60

01/8/30 6.fm

Image 60

Contents MD-MT888H Accessories Remote control x 1 Earphones x AC adaptor Battery carryingBattery charger x 1 Connection cable Carrying bag x Case x El-metal hydrideContents „ Warnings „ Caution„ Notes Special NotesPrecautions PrecautionsAvoid using or leaving the unit in the following places „ ImportantNames of Controls and Indicators Important Introduction -Names of Controls and Indicators„ Main unit „ Remote control unit Battery IndicatorReference Earphones SocketMenu button operation Menu displayIf you move the M button toward If you press the M buttonUsing with the Rechargeable Battery Preparation -Using with the Rechargeable Battery„ Charging „ Display of remaining amount of battery „ Charging timeRefresh Using with the AC Adaptor Preparation -Using with the AC AdaptorUsing with the Alkaline Battery Inserting a MiniDiscMD-MT888HConnections ConnectionsPreparation MD-MT888HLong Time Recording and Group Recording „ Long time recording„ Group recording LongWhen the group mode is selected Group lights up When the group mode is cancelled Group goes outGroup Playback „ Playback of group-recorded MDBasic Operation -Recording Recording Move the M button towardTo update the recorded contents of the MiniDisc „ Recording levelTo interrupt recording To stop recording„ Adding tracks to an existing group About the TOCBasic Operation -Playback „ 3-colour indicators To turn off the powerStart playback by moving the M button to- ward To interrupt playback„ Volume control „ Bass control„ To search a desired group Press the Group button so that the Group flashesUseful Features -Advanced Playback Advanced Playback„ To locate the desired portion „ To locate the beginning of a track„ Random play or repeat play „ Intro play „ To play at double speedUseful Features -Advanced Recording Advanced Recording„ Playback sound-actuated recording Hold down the REC button for 2 seconds or more„ Long-play recording Start recordingTo interrupt recording Times and 4 times long recording„ About the recording mode Indication Recording mode„ About Atrac „ Caution for 4 times long recording LP4„ To create your own track numbers „ Recording tracks as a single trackMmark and press it Move the M button Toward To and press it„ About track numbers „ Helpful tip when attaching a label „ About sampling rate converter„ Note for digital recording Useful Features -Recording from a Microphone MD-MT888HRecording from a Microphone„ To record from a microphone To write recorded contents on the MiniDisc Move the M button toward or to ad- just the recording levelMD-MT888HRecording from a Microphone „ Sound-actuated recording Mic Syn Chronised recording„ Track intervals During a mic manual recordingDuring a mic synchro recording Creating track numbers manuallyChecking Displays Checking Displays„ To display the playing time of an indi- vidual track „ Checking the remaining amount of bat Tery level Titling a MiniDisc Titling a MiniDisc„ Creating a disc name Whilst in the stop mode, press the M button„ Creating a group name „ Creating a track nameEnter the characters page 40, steps 4 Or to select Nname and press it Press the M button„ Characters symbols „ To erase a character„ To add characters „ To enter a spaceEditing a Recorded MiniDisc „ To erase one track at a time„ To erase all of the tracks at once Editing a Recorded MiniDiscWhen a track has a name before dividing „ To divide a track „ To move a trackTion the track is moved to Total number of tracks that can be dividedWhen one or both tracks to be combined have a Name „ To combine tracksTo combine two non-adjacent tracks Following cases, tracks may not be combined„ Moving a track to another group Moved toSelected group will be erased What is a master MiniDisc? What is a MiniDisc for stamping?„ Stamping titles from another MiniDisc Before stamping„ Creating a group before recording Operation of the MiniDisc for stamping„ Moving non-group tracks to after „ Erasing group informationAdvanced Features -Hold Function To cancel the hold modeHold Function Changing Default Settings Changing Default SettingsMenu „ Auto power save What is auto power save function?„ Beep sound „ Auto playMD-MT888HListening through Another System „ Listening through a stereo systemAnother System Listening throughOther Features and Caution „ Resuming auto play „ Rechargeable batteryReferences -Other Features and Caution MD-MT888HTroubleshooting Troubleshooting If such a problem occurs, do the following „ If trouble occurs „ Moisture condensation To remove condensationMD-MT888HMiniDisc System Limitations Error Messages Error MES Meaning Sages BlankError Messages LockedMaintenanceMD-MT888H „ CleaningError When the unit becomes dirtyMD-MT888HSpecifications SpecificationsInput sensitivity Sharp Corporation