Sharp MD-MT888H „ About Atrac, „ About the recording mode, Indication Recording mode

Page 30

MD-MT888HAdvanced Recording (continued)

Useful Features -Advanced Recording-

30

Notes:

zTracks can be recorded in stereo recording mode, 2 times long recording mode, and 4 times long recording mode on one MiniDisc.

zIn monaural recording, the sound on the right and left channels is mixed even if the input source is in stereo. Although you can hear the stereo sound from the ear- phones, the recorded sound is monaural.

zTracks recorded in 2 times long recording and 4 times long recording modes cannot be played with the unit that does not support these modes. On such a unit, no sound is heard. (The operation and the display may vary depending on the unit.)

zTracks recorded in monaural cannot be played if equipment does not support the monaural playback.

„About ATRAC

The ATRAC (Adaptive TRansform Acoustic Coding) sys- tem compresses the sound data into 1/5 by cutting out the inaudible sound. Since the sound is selected based on psychoacoustics masking, the sound quality is not impaired. This unit is equipped with the ATRAC3 com- pressing system that can reduce the sound data to 1/10 or 1/20 of its original size. By employing this system, 2 times and 4 times long recordings are enabled in stereo mode.

„About the recording mode

You can select the recording mode from stereo recording, 2 times long recording, 4 times long recording, and mon- aural recording. Recordable time varies depending on the recording mode. If the tracks are recorded on an 80- minute MiniDisc, its recording time changes as follows:

Indication	Recording mode	Recording
		time

SP	Stereo	MAX. 80 min.
LP2	2 times long (stereo)	MAX. 160 min.
LP4	4 times long (stereo)	MAX. 320 min.
MONO	Monaural	MAX. 160 min.

„Caution for 4 times long recording

(LP4)

Special compressing method allows the 4 times long recording to realise long-time stereo recording. There- fore, some noise is recorded occasionally. If sound qual- ity should be emphasised, stereo recording or 2 times long recording is recommended.

01/8/30 4.fm

Image 30

Contents MD-MT888H Battery charger x 1 Connection cable Carrying bag x AccessoriesRemote control x 1 Earphones x AC adaptor Battery carrying Case x El-metal hydrideContents „ Warnings „ Caution„ Notes Special NotesAvoid using or leaving the unit in the following places PrecautionsPrecautions „ ImportantNames of Controls and Indicators Important Introduction -Names of Controls and Indicators„ Main unit Reference „ Remote control unitBattery Indicator Earphones SocketIf you move the M button toward Menu button operationMenu display If you press the M buttonUsing with the Rechargeable Battery Preparation -Using with the Rechargeable Battery„ Charging „ Display of remaining amount of battery „ Charging timeRefresh Using with the AC Adaptor Preparation -Using with the AC AdaptorUsing with the Alkaline Battery Inserting a MiniDiscMD-MT888HConnections ConnectionsPreparation „ Group recording MD-MT888HLong Time Recording and Group Recording„ Long time recording LongGroup Playback When the group mode is selected Group lights upWhen the group mode is cancelled Group goes out „ Playback of group-recorded MDBasic Operation -Recording Recording Move the M button towardTo interrupt recording To update the recorded contents of the MiniDisc„ Recording level To stop recording„ Adding tracks to an existing group About the TOCBasic Operation -Playback Start playback by moving the M button to- ward „ 3-colour indicatorsTo turn off the power To interrupt playback„ To search a desired group „ Volume control„ Bass control Press the Group button so that the Group flashes„ To locate the desired portion Useful Features -Advanced PlaybackAdvanced Playback „ To locate the beginning of a track„ Random play or repeat play „ Intro play „ To play at double speed„ Playback sound-actuated recording Useful Features -Advanced RecordingAdvanced Recording Hold down the REC button for 2 seconds or moreTo interrupt recording „ Long-play recordingStart recording Times and 4 times long recording„ About Atrac „ About the recording modeIndication Recording mode „ Caution for 4 times long recording LP4Mmark and press it Move the M button Toward „ To create your own track numbers„ Recording tracks as a single track To and press it„ About track numbers „ Helpful tip when attaching a label „ About sampling rate converter„ Note for digital recording Useful Features -Recording from a Microphone MD-MT888HRecording from a Microphone„ To record from a microphone To write recorded contents on the MiniDisc Move the M button toward or to ad- just the recording levelMD-MT888HRecording from a Microphone „ Sound-actuated recording Mic Syn Chronised recordingDuring a mic synchro recording „ Track intervalsDuring a mic manual recording Creating track numbers manuallyChecking Displays Checking Displays„ To display the playing time of an indi- vidual track „ Checking the remaining amount of bat Tery level „ Creating a disc name Titling a MiniDiscTitling a MiniDisc Whilst in the stop mode, press the M buttonEnter the characters page 40, steps 4 „ Creating a group name„ Creating a track name Or to select Nname and press it Press the M button„ To add characters „ Characters symbols„ To erase a character „ To enter a space„ To erase all of the tracks at once Editing a Recorded MiniDisc„ To erase one track at a time Editing a Recorded MiniDiscTion the track is moved to When a track has a name before dividing„ To divide a track „ To move a track Total number of tracks that can be dividedTo combine two non-adjacent tracks When one or both tracks to be combined have a Name„ To combine tracks Following cases, tracks may not be combined„ Moving a track to another group Moved toSelected group will be erased „ Stamping titles from another MiniDisc What is a master MiniDisc?What is a MiniDisc for stamping? Before stamping„ Creating a group before recording Operation of the MiniDisc for stamping„ Moving non-group tracks to after „ Erasing group informationAdvanced Features -Hold Function To cancel the hold modeHold Function Changing Default Settings Changing Default SettingsMenu „ Beep sound „ Auto power saveWhat is auto power save function? „ Auto playAnother System MD-MT888HListening through Another System„ Listening through a stereo system Listening throughOther Features and Caution „ Resuming auto play „ Rechargeable batteryReferences -Other Features and Caution MD-MT888HTroubleshooting Troubleshooting„ Moisture condensation If such a problem occurs, do the following„ If trouble occurs To remove condensationMD-MT888HMiniDisc System Limitations Error Messages Error MES Meaning Sages BlankError Messages LockedError MaintenanceMD-MT888H„ Cleaning When the unit becomes dirtyMD-MT888HSpecifications SpecificationsInput sensitivity Sharp Corporation