Sharp DV-HR350H, DV-HR300H operation manual Post Code Security, Changing PIN Number

Post Code

VIDEO Plus+

Post Code Security

This feature should allow the Police to identify you as the owner of the Recorder if it is stolen. Each time the Recorder is turned on, your postcode will be displayed for 5 seconds. Your postcode cannot be changed or removed without first entering the correct PIN-number. If you with to use this function, follow the procedure below.

1 Press START MENU to display the “START MENU” screen.

2 Press '/ "/ \/ to select “OTHER SETTINGS 2”, then press SET/ENTER.

MODE	S E T T I NG
MANUA L		T UN I NG
CHA NN E L		SOR T
C L OCK	S E T T I NG
POS T	CODE
: S E L E C T
: E N T E R			: R E T URN

3 Press '/ " to select “POST

CODE”, then press SET/ENTER.

4 Press the Number buttons or '/

"to enter your desired PIN number.

• This must be a 4 digit number in the range 0000 – 9999.

5 After entering the PIN number, press to highlight the first digit of “POST CODE”.

6 To enter your post code press '/

"to scroll through the charac- ters, then press \/ to move to the next position.

7 Press SET/ENTER to confirm.

8 Write your PIN number in the box

provided for future reference.

Changing PIN NUMBER

You can change your PIN number at any time with the following procedure.

1 Press START MENU to display the “START MENU” screen.

2 Press '/ "/ \/ to select “OTHER SETTINGS 2”, then press SET/ENTER.

3 Press '/ " to select “POST

CODE”, then press SET/ENTER.

4 Press the Number buttons or

'/ " to enter your current PIN

number, then press SET/ENTER.

5 Press \ to re-select PIN number.

6 Enter your new PIN number. Press SET/ENTER to confirm, then press START MENU or EXIT to return to a normal screen.

NOTE

•Your Postcode can be changed at any time, but you must first enter your correct PIN number. If the wrong PIN number is entered, an “ERROR” will appear. Re-enter the correct number.

Important!

•Keep your Operation Manual separate from your Recorder.

30