Sharp DV-HR300H, DV-HR350H operation manual Function Setting, Functions under Other Settings

Function Setting

Functions under OTHER SETTINGS 1

This section explains various settings relating to recording and playback which can be used to get more out of the Recorder.

• For details about each setting, see the corresponding pages.

REC. FUNCTION spage 87

VIEW/PLAY SETTING spage 89

ADJUSTMENT spage 91

REC. FUNCTION

AUTO CHAPTER

•	This sets the interval of automatic chapter setting during recording.	10 (10 min interval)
•	Chapter marks set on a DVD-RW/R in Video mode cannot be combined by editing, so	15 (15 min interval)
	select an appropriate interval.	30 (30 min interval)
		- - (off)
EXACT RECORDING
•	This function works when timer recording (VIDEO Plus+/Timer Programme) onto DVD-	YES
	RW/R. If disc capacity runs low, and the programme cannot be recorded to the end,	NO
	this function will automatically change the recording mode so the programme will fit.
	(The recording mode set in above situation will have lower picture quality than the
	originally set recording mode.)

•If there is very little disc capacity left on the disc, the programme may not fit even if Exact Recording is set.

•When recording in EP or MN1 mode, there is no lower recording mode, so Exact Recording will not work.

REC. AUDIO FORMAT

•	PCM: If you record by setting the recording mode to “FINE” or “MN32”, you can record	PCM
	audio as PCM (uncompressed) audio which can be played back with 2ch audio	MPEG
	equipment.
	* This will not work when recording with the recording mode set to anything other than
	“FINE” or “MN32”.
	* Recording is done with a recording mode whose image quality is slightly lower than
	FINE mode recorded with the “MPEG” setting.
•	When making a PCM recording of bilingual sound, only the audio selected in “VIDEO
	MODE AUDIO” is recorded.
• MPEG: Records audio as MPEG audio.
EXTERNAL AUDIO
• This selects audio to be input from an external device.		STEREO
	* Be sure to always select “BILINGUAL” when recording bilingual sound. If you select	BILINGUAL
	“STEREO” when recording, the audio for the left channel (“L CH”) and right channel
	(“R CH”) will be heard together during playback.
	* When recording bilingual sound, you can switch between the left channel (“L CH”)
	and right channel (“R CH”) during playback in VR mode. In Video mode, only the
	audio set in “VIDEO MODE AUDIO” is recorded.

VIDEO MODE AUDIO

•	This selects whether to record the left channel (“L CH”) or right channel (“R CH”) when	L CH
	recording (or dubbing) bilingual sound to DVD-RW/R in Video mode.	R CH
	* This does not apply when recording from the DV IN terminal.
MANUAL REC. MODE
•	If you set by selecting one of the 32 picture quality levels for “MN”, recording will be	32 levels
	done at that picture quality when “MN” is selected using REC MODE on the remote
	control. For details, see page 40.

87