Sharp DV-HR300H, DV-HR350H operation manual Editing an Original Title HDD/DVD

Editing an Original Title (HDD/DVD)

9 Press Red (B) (CONFIRMING) to confirm the contents.

Searching for the Start Point and End Point Scenes

	•	The title is played back without the
		scene to be erased.
	Press Yellow (D) (ERASE) to
	erase.
	•	Go to step 10.
	•	Press RETURN to cancel scene
		erase.
VIDEO Plus+	10 Press \ to select “YES”, then
	press SET/ENTER.
	EDIT(HDD ORIGINAL)			25 / 12 10 : 28
		T I TLE : PR33	F INE
		T I TLE INFO: 4 / 10	MON 20 : 09	20 : 14
	ERASE SCENE
	CHANGE TITLE NAME
	CHANGE THUMBNAIL		ERASE THIS SCENE?
	DIVIDE CHAPTER
			YES	NO
		SELECT	ENTER ENTER	n RETURN
	•	Erase begins.
		When erase completes, the screen in
		step 5 appears.
	•	If “C (UNDO)” is displayed, you can
		undo edit by pressing Green (C).
	•	To quit scene erase, press RETURN.
		Then the edit screen appears.

11 Press EXIT to exit from Edit mode.

NOTE

Selecting start and end points for scene erase

•You cannot set a range shorter than 3 seconds.

•Once you erase a section of an original, it is completely erased. It cannot be restored, so be very careful and confirm before erasing.

•Scenes can only be added and erased a maximum of 50 times per title.

•If scenes have been added 51 or more times to a disc using another DVD recorder. Editing (Recording) may not function.

The following playback operations are available when searching for the start point and end point scenes.

Playback

•If you press PLAY, the currently paused title will be played back.

Skipping to the start of a chapter

•If the scene to be selected is in another title or chapter, first search for the title or chapter using Kor L.

Searching for scenes in a chapter

•GREV and JFWD are convenient for searching for a scene in a chapter.

Pause

•When you reach a scene near the start point or end point, press FSTILL/PAUSE to pause. This will make it easier to find the scene. The start and end points may shift slightly.

Frame Advance/Reverse

•If you press Lafter pause, the video will start Frame Advance Playback. If you press K, it will start Frame Reverse Playback.

Final selection of scene

•To select a scene more accurately, use slow playback starting a little before the scene to be selected. This will keep you from going beyond the scene.

If you press SLOW after pausing, you can select a scene at your leisure during slow playback of the video.

71