Sharp DV-HR300H, DV-HR350H operation manual For example for 1305 stop, press 1

9 Press '/ "or the Number buttons to enter the stop time, then press .

• For example for 13:05 stop, press 1 3

0 5.

	➞	RE C . MOD E
			F : F I NE	S : S P L : L P E : E P
		M : MA NUA L ( 1			3 2 ) ➞1 6
VIDEO Plus+		V P S / P DC
			: ON	- : OF F
		RE C . MED I A
			H : HDD	D : DV D
			: S E L E C T		: CH A NGE
			: E N T E R		: R E T URN

10 Press '/ "to select “REC. MODE”, then use \/ to select the recording mode.

When “M:MANUAL (1~32)” is selected:

• Select the recording mode with \/ , then press SET/ENTER. (The recording mode can be selected from 32 levels.)

11 Press '/ "to select “VPS/PDC”, then use \/ to turn the VPS/ PDC setting ON(“∗”)/OFF

(“-”).

12 Press '/ "to select “REC. MEDIA”, then use \/ to select the recording disc (“H:HDD” or “D:DVD”), then press SET/

ENTER.

	1 / 4
DA T E PR S T AR T	S T OP
2 5 / 1 2W 8 1 2 : 0 5	1 3 : 0 5 S D

--/ -- -- - : -- - : -- ---

--/ -- -- - : -- - : -- ---

-- / -- -- - : --	- : -- ---
2 / 4
ERA S E : CANCE L
: S E L E C T
: E N T E R	: R E T URN

•If any more timer recordings are to be set, repeat step 4 to 12.

13 When you have completed entering the timer settings, press START MENU or EXIT to exit from the “START MENU” screen.

Timer Recording

14 (When you select “D:DVD” in step

12, ensure the recordable DVD- RW/R is inserted into the Recorder) Press TIMER ON/OFF to place the Recorder in TIMER STANDBY mode.

•The TIMER indicator on the front of the Recorder lights up.

OPERATE

•The channel cannot be changed during TIMER STANDBY mode. To change the channel, set TIMER STANDBY to off.

•VPS/PDC is a signal broadcast by some TV stations which adjusts the start and stop time of your Recorder recording. This ensures that if there is a change in broadcast time for your programme the Recorder will still record the whole programme.

It is essential that the start time as it appears in the TV listing is used to programme the Recorder, as this informa- tion is used to identify the VPS/PDC signal corresponding to your programme.

•Even if recording by timer programming is completed, since the Recorder is VPS/PDC system compatible, the power may remain on internally (blue background output, LCD backlight off), but it will be turned off around 4 AM the next day or three hours after recording is complete.

•Data is still written to the disc after first timer recording is stopped, the first part of the next programme may not be recorded.

•During recording, press REC STOP to cancel the recording. If there are further recordings to be made, the Recorder will not return to TIMER STANDBY mode.

•When you set a DVD as recording media, timer recording will not start during disc playback. If “ALTERNATE RECORDING” is set to “YES”, the programme will be timer recorded to HDD.

•Timer recording will not start during dubbing.

•Manual recording and editing cannot be performed during timer standby.

45