Listening to a CD
1 Press the
2 Press the FUNCTION button until "CD" or "NO DISC" appears on the display.
When operating with the remote control, press the CD button.
3 Press the 
(OPEN/CLOSE) button to open the disc compartment.
4 Place a CD on the spindle, label side up.
Be sure to place 8 cm (3") disc in the middle of a disc holder.
5 Press the 
(OPEN/ CLOSE) button to close the disc com- partment.
Total number of | Total playing time |
tracks |
|
6 Press the 
(
) button to start playback from track 1.
When the last track on the disc has finished playing, the unit will stop automatically.
To interrupt playback: |
| |
Main unit operation: |
| |
Press the | button. |
|
To resume playback from the same point, press the | button again. | |
Remote control operation: |
| |
Press the | button. |
|
To resume playback from the same point, press the | button. | |
To stop playback:
Press the 
button.
To remove the CD:
Whilst in the stop mode, press the 
(OPEN/CLOSE) button.
Press the disc eject button and remove the CD.
Listening to the Radio
FM stereo mode indicator
FM stereo receiving indicator
1 Press the
2 Press the FUNCTION button until "FM" or "AM" ap- pears on the display.
When operating with the remote control, press the TUNER but- ton, and then the BAND button to select "FM" or "AM".
3 Press the TUNING (
or 
) button to tune in to the de- sired station.
Manual tuning:
Press the TUNING button as many times as required to tune in to the desired station.
Auto tuning:
When the TUNING button is pressed for more than 0.5 sec- onds, scanning will start automatically and the tuner will stop at the first receivable broadcast station.
Notes:
●This can be operated by pressing the TUN. (
or 
) button on the remote control.
●When radio interference occurs, auto scan tuning may stop automatically at that point.
●Auto scan tuning will skip weak signal stations.
●To stop the auto tuning, press the TUNING button again.
To receive an FM stereo transmission:
Press the FUNCTION (BAND) button to display the "ST" indicator.
●"
" will appear when an FM broadcast is in stereo.
●If the FM reception is weak, press the FUNCTION (BAND) button to extinguish the "ST" indicator. The reception changes to mon- aural, and the sound becomes clearer.
After use:
Press the
– 9 –