Basic adjustment
Audio settings
Go to “TV Menu” > “Setup” > “Audio”.
Menu
CH list | Setup |
:Enter | :Back |
Audio
STANDARD
Auto volume
[Off]
Treble
Bass
Balance
L30 
R30
Audio
Auto volume
Different sound sources sometimes do not have the same volume level, such as a programme and its commercial breaks. This function reduces this problem by equalizing levels.
Item
High | Strongly reduces the volume gaps among | |
different sound sources. | ||
|
Middle |
Low | Slightly reduces the volume gaps among | |
different sound sources. | ||
| ||
Off | Does not adjust the volume gaps. |
Audio
Audio adjustment
You can adjust the sound quality to your preference with the following settings.
Item | c(Cursor) | d(Cursor) |
Treble | For weaker treble | For stronger treble |
Bass | For weaker bass | For stronger bass |
Balance | Decrease audio | Decrease audio |
from the right | from the left | |
| speaker | speaker |
Audio
Surround
This function produces a surround effect from the speakers.
| Item | |
| Reproduces a | |
3D Stadium | events such as live sports or concert | |
| performances that take place in a stadium | |
| like setting. | |
| Reproduces a concert hall experience with | |
3D Hall | realistic live surround sound based on | |
reverberant sounds measured in a concert | ||
| ||
| hall. | |
| Reproduces a movie theatre experience | |
3D Movie | with realistic live surround sound based on | |
reverberant sounds measured in a movie | ||
| ||
| theatre. | |
3D | Creates | |
Standard | with detailed control of the signal phase. | |
Normal | Provides limited surround sound. | |
Off | Outputs normal sound. |
Audio
Bass enhancer
This function allows you to enjoy
Audio
Clear voice
This function emphasises speech against background noise for greater clarity.
Audio
Audio description setting
This function allows you to enable output of audio description if the TV receives a signal including audio description.
NOTE
•When the “Audio description” is set to “On”, the audio description sound is superimposed on the main audio when you select a broadcast compatible with audio description.
•If you do not clearly hear the sound for the visually impaired, go to “TV Menu” > “Setup” > “Audio” > “Audio description setting” > “Mix level”, and select the upper level to turn up the volume.
•This function is available only for DTV broadcasts. This “Audio description setting” menu is not displayed for the ATV or the external inputs.
•The audio description sound is superimposed on the main audio only when the sound is output on the speaker sound output, headphone sound output and sound for audio out output. The sound is not output on the S/PDIF sound output and the SCART sound output.
•This function is not available for the AQUOS Audio speaker system.
•This function does not work during
39