Sharp LC-60LE857RU Time shift playback, Auto input selection, Jump time setting, Device format

Other useful features

Time shift playback

Playback recorded scenes of the programme being recorded.

Press dduring recording.

• Press H to return the scene that is broadcasting.

NOTE

•You can also operate from the control panel by pressing

CONTROL.

•Time shift playback may take a few moments to start.

•Time shift playback will stop and the TV will return to normal broadcasting when a program is fast-forwarded to a scene that is near to the scene currently being broadcast. The timing at which it returns depends on the speed of fast-forwarding.

•Depending on the protection signal specified by a broadcast station, recorded broadcasts can only be played back for a certain period of time or cannot be played back at all (Page 12).

NOTE for France

•When switched scramble broadcast and non-scramble broadcast during time shift playback, a black screen may be displayed.

Display information regarding USB- recording

Channel display

Channel information displays by pressing p on the remote control unit.

Audio (ENG)	STEREO
Video
Subtitle	Off

>>New information

The recording icon shows up when REC E is pressed and the TV is recording the programme.

The status icon shows up depending on what is shown on the screen.

Counter

The counter displays on the screen with the control panel.

00:02:38/00:08:18

Current playback time

• Hidden during recording

Total playback time of the content

The grey bar shows how much time has progressed.

•Hidden during recording or playback-during- recording

NOTE

•You can also call up the information above by pressing CONTROL on the remote control unit or select “Control (USB REC)” from “TV Menu” > “Setup” > “Option” > “Option for view”.

View setting

Auto input selection

You can choose whether or not to switch the input source automatically when receiving an AQUOS LINK or an Euro SCART compatible signal on the TV during USB-recording operations.

Go to “TV Menu” > “Setup” > “View setting” > “USB REC setting” > “Auto input selection”.

Item

	Release USB-recording when receiving
Enable	an AQUOS LINK or a Euro SCART
	compatible signal. Switch input source
	automatically.
	USB-recording continues to work.
Disable	The TV does not switch input source
	automatically even when receiving
	an AQUOS LINK or a Euro SCART
	compatible signal.

View setting

Jump time setting

You can set the time interval for playback to resume after jumping backwards/forward.

Go to “TV Menu” > “Setup” > “View setting” > “USB REC setting” > “Jump time setting”.

•A time interval from 10 sec. to 99 min. 50 sec can be selected.

NOTE

•You can use the time interval you set using the aor bbuttons.

View setting

Device registration

You need to perform this function to register the USB HDD for the USB-recording.

Go to “TV Menu” > “Setup” > “View setting” > “USB REC setting” > “Device registration”.

•Refer to USB HDD registration (Page 51).

NOTE

•Only one USB HDD can be registered for USB- recording. Remove all USB HDDs except the one used for USB-recording.

•At least USB HDDs with memory between 100GB and 2TB and under are required for USB-recording to register.

•Some USB HDDs, such as ones which have multiple drives, etc., cannot be used for USB-recording.

View setting

Device format

You can format all data on the USB HDD.

Go to “TV Menu” > “Setup” > “View setting” > “USB REC setting” > “Device format”.

NOTE

•Once formatting has been completed, data cannot be restored.

54