Basic adjustment
Analogue setting | Sound sys. | E Sort |
Channel positions can be sorted freely.
You can reconfigure the analogue TV channels settings automatically or manually.
EAdditional search
Use this menu to add new services automatically after “Analogue search” in the “Auto installation” menu has been completed.
•Start searching channels after selecting the colour system and sound system.
EManual adjust
Use this menu to set up analogue TV channels manually.
After selecting “Yes” on the screen, press a/b/c/dto select the channel you want to
set and then press ;.
Fine
You can adjust the frequency to the desired position.
NOTE
•Adjust while checking the background picture as a reference.
•You can set by directly entering the frequency number of the channel with 0_9 numeric buttons.
EXAMPLE
•179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
•49.25 MHz: Press 4 > 9 > 2 > 5 > ;.
Colour sys.
Select the optimum colour system to receive (“Auto”, “PAL”, “SECAM”).
Select the optimum sound systems (broadcasting systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
Label
When a TV channel sends its network name, the “Auto installation” detects the information and assigns a name to it. However, you can change channel names individually.
Select each character of the new name for the channel with using the software keyboard (Page 14).
NOTE
• The name can be five characters or less.
Skip
Channels with “Skip” set to “On” are passed over when using :r/s even if selected while watching the image from the TV.
Lock
You can block the viewing of any channel.
NOTE
•See “PIN” for setting a PIN.
•When “Lock” is set to “On” for a channel, “Child lock has been activated” displays, and the image and sound of the channel are blocked.
•When pressing 6 while “Child lock has been activated” displays, the PIN input window will display. Inputting the correct PIN unlocks the “PIN” temporarily until the power is turned off.
1Press c/dto select “Yes”, and then press ;.
2 Press a/b/c/dto select the channel you want to move, and then press ;.
3 Press a/b/c/dto move it to the desired position, and then press ;.
4Repeat steps 2 and 3 until all desired channels are sorted.
EErase programme
Channels can be erased individually.
1Press c/dto select “Yes”, and then press ;.
2 Press a/b/c/dto select the channel you want to erase, and then press ;.
•A message window pops up.
3Press c/dto select “Yes”, and then press ;to erase the selected channel. All the subsequent channels move up.
4Repeat steps 2 and 3 until all desired channels are erased.
43