Sharp LC-80LE857KN Specifications 3D glasses sold separately, Troubleshooting 3D Images

Page 79

Enjoying 3D image viewing

Specifications — 3D glasses (sold separately)

Product

3D Glasses

Model number

AN-3DG40

Lens type

Liquid crystal shutter

Power supply

DC3V

Battery

Lithium button battery (CR2025 x 1)

Battery life

Approx. 100 hours of continuous use

Dimension (W x H x D)

171.2 × 46.0 × 162.4 mm

Weight

Approx. 31.0 g (including the lithium ion polymer

 

rechargeable battery)

Operating temperature

10°C to 40°C (The 3D glasses cannot operate fully at extreme

 

high or low temperatures. Please use them within the

 

specified usage temperature range.)

The product serial number is displayed on the 3D glasses as indicated in the illustration on the left. The first three digits represent the date of manufacture.

Example: Manufactured on February 23, 2013

S/N : 8 2 P

Manufacture number

Troubleshooting — 3D Images

Problem

Possible solution

• 3D images are not

• Is “3D auto change” set to “Off”? Press 3D to switch to

displayed.

3D mode (Page 76).

If “3D auto change” is set to “Mode1” or “Mode2” but no 3D images are displayed, check the display format of the content being viewed. Some 3D image signals may not be recognized as 3D images automatically. Press

3D to select the appropriate display format for the 3D image (Page 76).

Is the power of the 3D glasses turned on? Press the power button for at least 2 seconds to turn on the 3D glasses.

Are the 3D glasses set to 2D mode? Press the power button for an amount of time that is less than 2 seconds to switch the 3D glasses to 3D mode.

Is there an obstacle between the 3D glasses and the TV, or is something covering the receiver on the 3D glasses? The 3D glasses operate by receiving a signal from the TV. Do not place anything between the 3D emitter on the TV and the receiver on the 3D glasses.

Images displayed in 3D • Is the power of the 3D glasses turned on? Press the

mode appear doubled

power button for at least 2 seconds to turn on the 3D

Month of

manufacture

1:1

2:2

3:3

8 :8

9 :9 A:10 B:11 C:12

Day of

manufacture

 

1: 1

A : 10

 

2: 2

B : 11

 

3: 3

 

 

 

H : 17

 

 

J : 18

 

 

N : 22

 

 

P : 23

 

 

W: 30

 

 

X : 31

* “I”, “O”, “Y” and “Z” are not used.

 

 

while you are wearing the

glasses.

3D glasses.

 

 

 

 

 

 

 

 

 

• Images displayed in 3D

• Are the 3D glasses set to 2D mode? Press the power

mode appear 2D while

button while viewing 2D images, the LED light blinks in

you are wearing the 3D

green and the 2D images switch to 3D images.

glasses.

 

NOTE

Please contact your local authority for the correct method of disposal of this product and/or packing.

• For further details, refer to the operation manual of the 3D glasses.

77

Image 79
Contents Model CE Statement Introduction ContentsDear Sharp customer Precautions when transporting the TV Important safety precautionsCaring for the cabinet 3D glasses AN-3DG40, sold separately Part name Supplied accessories Optional accessoriesNumber Screws length 16 mm and a screwdriver PreparationAttaching the stand unit for 60/70 inch models Mm into the holes of the stand coverM6 screws Stand may result in the TV falling overAngle of the remote control unit Using the remote control unit Inserting the batteriesTV front/side view TV rear view Part names and functionsImportant information Remote control unit Channels Preparation Connecting the TV Preparation Setting the TVQuick guide Operation overviewEnjoy additional features Advanced featuresDaily operation CI plus 1.3 Standard Recording CAM PIN settingGo to TV Menu Setup Option CI setting CI menu Inserting the CA card into the CI module3Exit the Home screen Using the Home screen1Display the Home screen 2Select an itemSelecting in the Menu Using the Menu screenUsing Software keyboard Display the Menu screenInitial auto installation Initial auto installationConfirm the following before turning on the power Searching for cable broadcasts Digital broadcast settingAnalogue broadcast setting Searching for terrestrial broadcastsPress a/bto select Single satellite, and then Single satellite setting Search startSearching for satellite broadcasts Series onlyChannel strength DVB-T/T2/C/S Checking signal strengthSupplying power to the antenna Checking signal strengthSelecting an external video source To standby modeSwitching on from standby Watching TVOperation without a remote control unit Selecting a sound modeChannel display Operator profile Before installationHow to add / remove / move your favourite channels Favourite Channel InformationGenre icon list Useful settings for using EPGDisplay range setup Genre icon setupSelecting a programme using EPG Press c/dto select Watch or Record, and then press Timer setup using EPGCancelling the timer setup Cancelling using B button on the remote control unitButtons for teletext operations What is teletext?Teletext Turning teletext on/offHbb TV application Data service settingMHEG-5 application UK only MHP application 858 series onlyConnection method for other devices Connecting external devicesBefore connecting Introduction to connectionsVideo connections Hdmi connection When using the Hdmi 2 terminalC R Component connection Scart connectionVideo connection Connecting an amplifier with digital/analogue audio inputsAfter connecting Digital audio output settingWhat you can do with Aquos Link Controlling Hdmi devices usingWhat is Aquos LINK? Regarding Select recording deviceAquos BD player/AQUOS recorder Aquos Audio speaker system Connecting an Aquos BD player/AQUOS recorder onlyAquos Link connection  HDMI-certified cable commercially availableOperating an Aquos Link device Aquos Link setup Basic operationAquos Link menu Media change Setup menuSound mode change Top menu/title list Recorder EPG Model selectAuto Input Selection Using a Smartphone with the TVAuto Power On Operation Using the Remote ControlClear Picture Processing Basic adjustmentPicture settings AV modeAdvanced Picture adjustmentsSub pixel control Gamma adjustmentFilm mode Game typeAudio description setting Audio settingsAuto volume Audio adjustmentECO picture control Power save settingsNo signal off Sleep timerProgramme setup View settingsDigital setting Auto installationCable Satellite setting 857 series onlyButtons for Manual adjust operation Favourite network selectionErase programme When selecting Yes Individual setting PINIndividual setting Clock Clock setupLanguage Individual setting LanguageDigital audio language SubtitleMode only DTV/SAT mode Optional features settingsWide mode Auto wide only DTV/SAT modeAudio select Terminal settingDigital audio output Input skip Input labelColour system Headphone out settingAdjusting image position Headphone/Audio out selectIllumination Additional featuresWallpaper setting Boot pictureGame play time Key lock Cancelling the lockUSB-recording Other useful featuresConnecting a USB HDD Disconnecting the USB HDDREC E How to operate USB-recordingRemote control unit Control panel Buttons Description Buttons for USB-recording operationTimer list USB-recording timer settingUSB-recording playback Device registration Jump time settingTime shift playback Auto input selectionUSB media/Home network Photo modeSelecting the BGM Music modeSlide show Disconnecting the USB device Video mode3D mode Buttons for playing mode When using USB media modeHome network server compatibility DivX setupSelecting the picture size for video mode USB device compatibilityConnecting a PC Connecting a PCDisplaying a PC image on the TV Selecting the picture size Fine sync Adjusting the PC image automaticallyAdjusting the PC image manually Auto syncFrequency Sub PC compatibility chartResolution Horizontal Vertical Analogue Digital VesaPC control of the TV Control Command Parameter Control Contents Command listHow to connect Network setupConnecting to the network Wired connection overviewWireless installation Wireless connection overviewOption menu What is Net TV?Net TV Operations in Net TV Basic operationInputting texts Video storeClear Net TV memory Enjoying 3D image viewing Before using the 3D glasses Power button  LED indicator  Nose pad Preparing for the 3D glasses Supplied accessoriesPart Names Usage Range of the 3D Glasses Using the 3D glasses Before using the 3D GlassesUsing the 3D glasses Attaching the Nose PadReplace the battery Replacing the Battery1Use the tip of a ballpoint pen or similar object 3D glasses lenses Display format for 3D and 2D images Using the 3D2D mode Without Using the 3D GlassesCan be detected automatically Switching 3D to 2D modeReceiving a 3D image signal that Viewing 3D imagesWatching 2D images in 3D Switching to the previous modeConfiguring the TV settings to enhance 3D image viewing 3D picture adjustments3D setup Troubleshooting 3D Images Specifications 3D glasses sold separatelyAppendix TroubleshootingReset Reset the PINPicture / Audio test Download setupGetting update information Updating your TV via DVB-T/T2/ C/S*/S2Information on the software licence for this product Software updateReceiver report IdentificationTrademarks Browser This product includes the OperaLC-80LE857KN SpecificationsModel LC-80LE858EWPA2-PSK AES Specifications Wireless LAN USB adapter60o/70o/80o Environmental specificationsWall mount audio setup Mounting the TV on a wallWall mount kit specifications Abbreviation list Rating table for child lockDimensional drawings 441 EU Energy Label for Televisions XYZ13P05-PL-NG