Sharp LC-60LE855KN How to operate USB-recording, Buttons for USB-recording operation, Rec E

Page 54

Other useful features

How to operate USB-recording

You can enjoy DTV/SAT recording or playback by connecting a commercially available USB HDD to the TV.

CAUTION

Do not unplug the AC cord or turn off the MAIN POWER switch during USB-recording timer setting or USB- recording.

When the AC cord is unplugged and the MAIN POWER switch is turned off:

− The USB-recording timer setting is cancelled.

USB-recording may be automatically stopped when signal reception is poor.

Only this TV can playback the programme recorded on the USB HDD connected to this TV. The programmes cannot playback on other TV or PC.

When a CAM PIN code is required for recording a programme, it is necessary to enter the CAM PIN code in advance (Page 12).

SHARP corporation bears no responsibility regarding compensation for content when recording cannot does not take place, loss of recorded data or other direct or indirect damages related to these matters. Please be forewarned.

EButtons for USB-recording operation

Remote control unit

Control panel

Buttons

Description

 

Displays the list of the programmes

 

recorded by USB-recording.

 

 

 

Start recording the programme you are

 

watching.

REC E

• You cannot playback the recorded

programme until several seconds

 

 

after pressing REC E to start

 

recording.

REC STOP H

Stop recording.

I

Playback the recorded programme.

 

Stop the programme in playback and

H

go back to the real time broadcast

 

(live).

 

Pause the programme in playback

F

(USB-recording continues).

• This function is released in 15

 

 

minutes.

 

Reverse (each time you press this

S

button, the reverse speed changes in

 

three levels).

 

Fast forward (each time you press this

J

button, the fast forward speed changes

 

in three levels).

KJump backward to the previous chapter point*.

LJump forward to the next chapter point*.

 

Playback will resume after jumping

a

backward by the time interval you set

 

in “Jump time setting” (Page 54).

 

Playback will resume after jumping

b

forward by the time interval you set in

 

“Jump time setting” (Page 54).

* Chapter points are fixed at 10 minute increments.

NOTE

Refer to Regarding “Select recording device” (Page 31), when the buttons for USB-recording do not work.

Instead of pressing buttons on the remote control unit, most of the operations shown to the left are also available on the screen with the control panel. You can call up this control panel by pressing CONTROL on the remote control unit or select “Control (USB REC)” from “TV Menu” > “Setup” > “Option” > “Option for view”.

The “Audio description setting” menu does not work during USB-recording playback.

USB-recording stops if no operation detected for three hours.

When recording operations are not stopped manually, recording will automatically stop after six hours.

To release USB-recording, press REC STOP H, change the DTV/SAT channel or change “INPUT”.

Some functions do not work during USB-recording.

USB-recording does not start automatically, but starts only when REC E is pressed or when a USB-recording timer setting is started.

The PIN is required when you use the buttons such as S, J, K, L, a, bif you set the PIN and any options for “Parental rating” except “None” are selected.

Do not disconnect the USB-HDD used for USB- recording during USB-recording operation.

MHP services do not work during USB-recording playback (858 series only).

52

Image 54
Contents Model CE Statement Contents IntroductionDear Sharp customer Important safety precautions Precautions when transporting the TVCaring for the cabinet 3D glasses AN-3DG40, sold separately Supplied accessories Optional accessories Part nameNumber Mm into the holes of the stand cover PreparationAttaching the stand unit for 60/70 inch models Screws length 16 mm and a screwdriverStand may result in the TV falling over M6 screwsUsing the remote control unit Inserting the batteries Angle of the remote control unitPart names and functions TV front/side view TV rear viewImportant information Remote control unit Operation overview Preparation Connecting the TV Preparation Setting the TVQuick guide ChannelsAdvanced features Enjoy additional featuresDaily operation Inserting the CA card into the CI module Recording CAM PIN settingGo to TV Menu Setup Option CI setting CI menu CI plus 1.3 Standard2Select an item Using the Home screen1Display the Home screen 3Exit the Home screenDisplay the Menu screen Using the Menu screenUsing Software keyboard Selecting in the MenuInitial auto installation Initial auto installationConfirm the following before turning on the power Searching for terrestrial broadcasts Digital broadcast settingAnalogue broadcast setting Searching for cable broadcastsSeries only Single satellite setting Search startSearching for satellite broadcasts Press a/bto select Single satellite, and thenChecking signal strength Checking signal strengthSupplying power to the antenna Channel strength DVB-T/T2/C/SWatching TV To standby modeSwitching on from standby Selecting an external video sourceSelecting a sound mode Operation without a remote control unitChannel display Favourite Channel Information Before installationHow to add / remove / move your favourite channels Operator profileGenre icon setup Useful settings for using EPGDisplay range setup Genre icon listSelecting a programme using EPG Cancelling using B button on the remote control unit Timer setup using EPGCancelling the timer setup Press c/dto select Watch or Record, and then pressTurning teletext on/off What is teletext?Teletext Buttons for teletext operationsMHP application 858 series only Data service settingMHEG-5 application UK only Hbb TV applicationIntroduction to connections Connecting external devicesBefore connecting Connection method for other devicesWhen using the Hdmi 2 terminal Video connections Hdmi connectionScart connection C R Component connectionDigital audio output setting Connecting an amplifier with digital/analogue audio inputsAfter connecting Video connectionRegarding Select recording device Controlling Hdmi devices usingWhat is Aquos LINK? What you can do with Aquos Link HDMI-certified cable commercially available Connecting an Aquos BD player/AQUOS recorder onlyAquos Link connection Aquos BD player/AQUOS recorder Aquos Audio speaker systemAquos Link setup Basic operation Operating an Aquos Link deviceAquos Link menu Top menu/title list Recorder EPG Model select Setup menuSound mode change Media changeOperation Using the Remote Control Using a Smartphone with the TVAuto Power On Auto Input SelectionAV mode Basic adjustmentPicture settings Clear Picture ProcessingPicture adjustments AdvancedGame type Gamma adjustmentFilm mode Sub pixel controlAudio adjustment Audio settingsAuto volume Audio description settingSleep timer Power save settingsNo signal off ECO picture controlAuto installation View settingsDigital setting Programme setupFavourite network selection Satellite setting 857 series onlyButtons for Manual adjust operation CableErase programme Clock setup Individual setting PINIndividual setting Clock When selecting YesSubtitle Individual setting LanguageDigital audio language LanguageAuto wide only DTV/SAT mode Optional features settingsWide mode Mode only DTV/SAT modeInput label Terminal settingDigital audio output Input skip Audio selectHeadphone/Audio out select Headphone out settingAdjusting image position Colour systemBoot picture Additional featuresWallpaper setting IlluminationCancelling the lock Game play time Key lockDisconnecting the USB HDD Other useful featuresConnecting a USB HDD USB-recordingButtons for USB-recording operation How to operate USB-recordingRemote control unit Control panel Buttons Description REC EUSB-recording timer setting Timer listUSB-recording playback Auto input selection Jump time settingTime shift playback Device registrationPhoto mode USB media/Home networkMusic mode Selecting the BGMSlide show Buttons for playing mode When using USB media mode Video mode3D mode Disconnecting the USB deviceUSB device compatibility DivX setupSelecting the picture size for video mode Home network server compatibilityConnecting a PC Connecting a PCDisplaying a PC image on the TV Selecting the picture size Auto sync Adjusting the PC image automaticallyAdjusting the PC image manually Fine syncVesa PC compatibility chartResolution Horizontal Vertical Analogue Digital Frequency SubPC control of the TV Command list Control Command Parameter Control ContentsWired connection overview Network setupConnecting to the network How to connectWireless connection overview Wireless installationOperations in Net TV Basic operation What is Net TV?Net TV Option menuVideo store Inputting textsClear Net TV memory Before using the 3D glasses Enjoying 3D image viewingPreparing for the 3D glasses Supplied accessories  Power button  LED indicator  Nose padPart Names Attaching the Nose Pad Using the 3D glasses Before using the 3D GlassesUsing the 3D glasses Usage Range of the 3D GlassesReplacing the Battery Replace the battery1Use the tip of a ballpoint pen or similar object 3D glasses lenses Without Using the 3D Glasses Using the 3D2D mode Display format for 3D and 2D imagesViewing 3D images Switching 3D to 2D modeReceiving a 3D image signal that Can be detected automatically3D picture adjustments Switching to the previous modeConfiguring the TV settings to enhance 3D image viewing Watching 2D images in 3D3D setup Specifications 3D glasses sold separately Troubleshooting 3D ImagesTroubleshooting AppendixReset the PIN ResetUpdating your TV via DVB-T/T2/ C/S*/S2 Download setupGetting update information Picture / Audio testIdentification Software updateReceiver report Information on the software licence for this productTrademarks This product includes the Opera BrowserLC-80LE858E SpecificationsModel LC-80LE857KNSpecifications Wireless LAN USB adapter WPA2-PSK AESMounting the TV on a wall Environmental specificationsWall mount audio setup 60o/70o/80oWall mount kit specifications Rating table for child lock Abbreviation listDimensional drawings 441 XYZ EU Energy Label for Televisions13P05-PL-NG