Appendix
Information
Receiver report
Display reports regarding failures and changes for timer settings.
Go to “TV Menu” > “Setup” > “Information” > “Receiver report”.
Information
Identification
You can check the TV ID on the screen for reporting to customer service.
Go to “TV Menu” > “Setup” > “Information” > “Identification”.
Information on the software licence for this product
Information
Software licence
You can read the software licences in this menu.
Go to “TV Menu” > “Setup” > “Information” > “Software licence”.
ESoftware composition
The software included in this product is comprised of various software components whose individual copyrights are held by SHARP or by third parties.
Deactivating Netflix function
Information
Netflix help
When you deactivate Netflix, refer to following process.
1Go to “TV Menu” > “Setup” > “Information” > “Netflix help”.
2Press c/dto select “Deactivate”, and then press OK.
3Press c/dto select “Yes”, and then press OK.
Updating your TV via USB/network
Information
Software update
This function allows you to update to the latest software via a USB device or network.
•To check the availability of the latest software versions, visit
1Go to “TV Menu” > “Setup” > “Information” > “Software update” > “USB update”.
•You can also update the software through the network. Go to “TV Menu” > “Setup” > “Information” > “Software update” > “Network update” and follow the
•A broadband connection and Network setup are required to update the software using the internet (Pages
2Press ;and then insert the USB device containing the software update file.
CAUTION
•Be sure to insert the USB device correctly into the terminal.
3Press >to close the window when a screen prompt pops up.
4The TV displays a confirmation screen while checking the data in the inserted USB device.
CAUTION
•If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 2 and 3 after pressing ;.
•When an error message displays, check to see if:
•The USB device is inserted firmly.
•The USB memory has two or more software update files.
•No data for updating the system exists in the USB memory.
•The software update file is broken.
•The software update file is not compatible with your TV’s software.
•The current system is same as the system update data.
•The USB memory is not formatted by FAT32.
5The TV displays the software version information after checking the data.
6Press c/dto select “Yes” to update the system, and then press ;.
7The TV restarts automatically, and the software update will be complete.
• This operation may take a while.
CAUTION
•The Net TV memory, which includes the lock code, passwords, and cookies, may be cleared when the software update is carried out.
81