If you start Digital Cable scan process, the following screen will be displayed.
You can select frequency ranges from this screen. For highlighting lines you see, use “
” or “
” button. You can enter the frequency range manually by using the numeric buttons on the remote control. Set Start and Stop Frequency as desired by using numeric buttons on the remote control. After this operation, you can set Search Step as 8000 KHz or 1000 KHz. If you select 1000 KHz, the TV will perform search process in a detailed way. Searching duration will thus increase accordingly. When finished, press OK button to start automatic search. Automatic searching screen will be displayed during the process.
Note: If you select an extended gap between Start and Stop frequency rate, automatic search duration will take a longer time.
Analog Fine Tune
•Select Analog Fine Tune from the Installation menu by using “
” or “
” and OK buttons. Analog Fine Tune screen will be displayed. Analog Fine Tune feature will not be available if there are no analog channels, digital channels and external sources stored.
•Press OK button to proceed. Use “
” or “
” button to set Fine Tune. When finished, press OK button again.
First Time Installation
If you want to delete all channels and settings please select First Time Installation and press OK. The TV’s memory will be deleted and installation progress starts.
Clear Service List (*)
(*)This setting is visible only when the Country option is set to Denmark, Sweden, Norway or Finland.
Use this setting to clear channels stored. Press “
”or “
” button to select Clear Service List and then press OK. The following OSD will be displayed on the screen:
English
Select YES and press OK to continue or select NO and press OK button to cancel.
Managing Stations: Channel List
The TV sorts all stored stations in the Channel List. You can edit this channel list, set favourites or set active stations to be listed by using the Channel List options.
•Press “MENU” button to view main menu. Select Channel List item by using “
” or “
” button. Press OK to view menu contents.
Select Active Network feature allows you to select only the broadcasts within the selected network.
Select Edit Channel List to manage all stored channels. Use “
” or “
” and OK buttons to select Edit Channel List.
Channel List Types
You can set channel list type function to display desired types of available channels.
RED: Lists only digital aerial and analogue broadcasts.
GREEN: Lists only digital cable and analogue broadcasts.
OK: Watch selected.
MENU: Exits.
BLUE: Displays filtering options. - 24 -
A01_[GB]_MB70_5112UK_DVBT_C_DLNA_HBBTV_MMH_WIFI_32942LED | _GOLD11_10075886_50201414.indd 24 | 16.04.2012 14:50:04 |
|
|
|