This means that the connection is now established. To disconnect from a wireless network, you should highlight Configuration Status and press OK.
You can navigate between menu tabs by pressing left/ right buttons. The help bar on the bottom of the dialog shows features that you may use. Press BLUE button to check your internet connection speed.
You can check the signal strenght by using the network settings menu for the wireless device mode.
Information
Configuration Status: Displays
IP Address: Displays the current IP address.
Network Name: Connected networks’ name will be displayed.
Delete Saved Wifi Profiles
Saved profiles will be deleted if you press red button while wireless device selection osd is on the screen.
Connecting to your Cell Phone via WiFi (Optional)
•If your cell phone has WiFi feature, you can connect your cell phone to your TV by using WiFi connection via a router, in order to play content from your phone. For this, your cell phone must have an appropriate sharing software.
•Connect to your router following the steps stated above in the Wireless Connection section.
•Afterwards, engage your cell phone with the router and then activate sharing software on your cell phone. Then, select files that you would like to share with your TV.
•If the connection is established correctly, you should now access the shared files of your cell phone via the Media Browser of your TV.
•Enter Media Browser menu and playback device selection OSD will be displayed. Select your cell phone’s ident and press OK to continue.
Note: This feature may not be supported by some cell phones.
Configuring Other Settings
To view general configuration preferences, select Other Settings in the Settings menu and press OK button.
Operation
•Press “
” or “
” buttons to select an item.
•Use “
” or “
” button to set an option.
•Press OK button to view a
Menu Timeout: Changes timeout duration for menu
screens.
Scan Encrypted: When this setting is on, search process will locate the encrypted channels as well. If it is set as Off, encrypted channels will not be located in automatic search or manual search.
Blue Background: Activates or deactivates blue background system when the signal is weak or absent.
Software Upgrade: To ensure that your TV always has the most update information, you can use this setting. In order for the proper operation, please ensure that the TV is set to standby mode.
You can enable or disable automatic upgrade by setting Automatic Scanning option.
English - 40 -
A01_[GB]_MB70_5112UK_DVBT_C_DLNA_HBBTV_MMH_WIFI_32942LED | _GOLD11_10075886_50201414.indd 40 | 16.04.2012 14:50:18 |
|
|
|