Media Browser Settings
You can set your Media Browser preferences by using the Settings dialog. Press “
” or “
” button to highlight an item and use “
” or “
” button to set.
View Style: Sets default browsing mode.
Music FF/FR Speed: Sets Music FF/FR Speed time.
Slide Show Interval: Sets slide show interval time.
Show Subtitle: Sets subtitle enabling preference.
Subtitle Language: Sets supported subtitle language.
Subtitle Position: Sets subtitle position as up or down.
Subtitle Font Size: Sets subtitle font size (max. 54pt).
Timeshift Recording
IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available.
•Press 
(PAUSE) button while watching a broadcast for switching to timeshifting mode.
•In timeshifting mode, the programme is paused and simultaneously recorded to the connected USB disk
(*). Press 
(PLAY) button again to watch the paused programme from the stopped moment.
•This playback is performed in x1 playback speed. You will see the timeshift gap between the real and the timeshifted programme in the info bar.
•Use 
/
(PREVIOUS/NEXT) buttons to move forward or backward on timeshift playback. When the timeshift is reached, timeshifting mode will be quitted and you will switch back to watching normal broadcast.
•Press 
(STOP) button to quit timeshifting mode.
(*)Similtaneous timeshifting recording’s duration depends on your connected USB disk’s file size and defined Max. Timeshift in the Recordings Configuration menu. See the section, “Recordings” for more information on setting Max. Timeshift.
Note: Switching to a different broadcast or source; and viewing main menu are not available during the timeshifting.
Lip Sync delay may occur during the timeshifting.
Standby button is ignored during the timeshifting. The TV will not switch to standby mode during the timeshifting.
Instant Recording
IMPORTANT: To record a programme, you should first connect a USB disk to your TV while the TV is switched off. You should then switch on the TV to enable recording feature. Otherwise, recording feature will not be available.
•Press 
(RECORD) button to start recording an event instantly while watching a programme. The following OSD appears on the screen:
•Record OSD will then be displayed for a short time and the current event will be recorded.
•You can press 
(RECORD) button on the remote control again to record the next event on the EPG. In this case, OSD will display the programmed events for recording.
Press 
(STOP) button to cancel instant recording. The following OSD will be displayed:
English - 29 -
A01_[GB]_MB70_5112UK_DVBT_C_DLNA_HBBTV_MMH_WIFI_32942LED | _GOLD11_10075886_50201414.indd 29 | 16.04.2012 14:50:09 |
|
|
|