Conﬁguring Network Settings

•Select Sources in the Settings menu and press OK button.

•Press“” or “” buttons to select a source.

•Use “” or “” button to enable or disable the selected source. Changes are automatically stored.

Note: Your TV’s Network Settings include Wired and Wireless Connection options. However, if your TV does not have USB Wi-Fi dongle(sold separately), you should use Wired Connection type. If you try to connect via Wireless Connection when your TV does not have a USB Wi-Fi dongle, a warning screen will appear and the TV will not get an IP address. Try connecting the LAN cable after this and then the TV will be able to get an IP address.

Conﬁguring Wired Device Settings

•On Network Settings window you can set network type of the TV set, which connects the TV to the Internet. If you are connecting the TV via ETHERNET INPUT, select Network Type as Wired Device to conﬁgure.

Setting Network Type

•Network type can be selected as Wired or Wireless device, in accordance with the active connection to the TV set. Select this as Wired if you have connected to the TV a LAN cable. Select as Wireless if you connect via the wireless USB dongle(sold separately).

Setting Conﬁguration Status

•This section displays the status of the connection. Select Connected if you want to activate Wired or Wireless connection. Select as Not Connected to quit an active connection.

IP Address

•If an active connection is available, the IP address will be displayed on this section. If you want to conﬁgure IP address preferences, press GREEN button and switch to the advanced mode.

Conﬁguring Wired Network Settings in Advanced Mode

After pressing GREEN button, Advanced mode will be available. While in Advanced Mode, press RED button to edit settings. When ﬁnished, press OK to save, Press RETURN/BACK to cancel.

Wi-Fi Settings (Optional)

Wi-Fi feature can be used for a wireless network connection (optional). The feature is used for infrastructure purposes only, such as connecting to the web, hbb sites and connecting with DLNA servers (optional). Select Wireless Device option to switch to Wireless Settings from Network Settings window.

Press GREEN button to switch to advanced mode and then press OK button to edit settings.

To enable Wi-Fi feature, proﬁles should be conﬁgured properly. Please plug in the Wi-Fi dongle(sold separately) to one of the USB ports (IMPORTANT: “Veezy 100” USB dongle is required to use wireless network feature. To use your TV with your wireless network, you need a “Veezy 100” Wireless USB dongle.).

Press YELLOW button to scan wireless network from network settings menu. Afterwards available network list will be displayed. Please select your desired network from the list. If the selected network is protected with a password, please enter the correct key by using the virtual keyboard. You can use this keyboard via navigation buttons (Left/Right/Up/Down) and OK button on the remote control. Wait until the IP the address is shown on the screen.

English - 39 -

A01_[GB]_MB70_5112UK_DVBT_C_DLNA_HBBTV_MMH_WIFI_32942LED	_GOLD11_10075886_50201414.indd 39	16.04.2012 14:50:17