Sharp 60LE920UN, 52LE920UN service manual Terminal Cover Bottom

LC-52LE920UN/LC-60LE920UN

4. Removing of MAIN Unit, POWER Unit, Woofer, Stand Angle,60" LCD Panel Module Unit.

1.Remove the 7 lock screws d) and detach the MAIN Unit _).

2.Remove the 2 lock screws ® and detach the Terminal Cover (Bottom) ®.

3.Remove the 2 lock screws ® and detach the Terminal Cover (Side) ®.

4.Remove the 6 lock screws ® and detach the POWER Unit ®.

5.Remove the 4 lock screws ® and detach the Sub Woofer @.

6.Remove the 1 lock screw @ and detach the LCD Fixing Angle (Bottom-R) @.

7.Remove the 2 lock screws @ and detach the LCD Fixing Angle (Top-L) @.

8.Remove the 2 lock screws @ and detach the LCD Fixing Angle (Top-R) @.

9.Remove the 2 lock screws @ and detach the LCD Fixing Angle (Bottom-L) @.

10.Remove the 4 lock screws @ 2 lock screws @ and detach the 2 LCD Fixing Angle (B-MA) ® and 2 Fixing Angle (B-M2) _.

11.Remove the 12 lock screws @ and detach the 2 Stand Angle ®.

12.Remove the 3 lock screws @ and detach the BL Support Angle ©.

13.Remove the 11 lock screws @ and detach the 60" LCD Panel Module Unit @.

LCD Fixing Angle _¢@ @_1_(_ LCD Fixing Angle

(Top-L)

(Top-R)

)TERMINAL Cover (Bottom)

60" LCD Panel

Module Unit

		,_,1		:_	"-"
			Stand	,_
LCD	Fixing Angle _\	2_	Angle	(2_
							,1_i) LCD Fixing Angle
(Bottom-L)
						_]	(Bottom-R)
			LCDFixingAngle		'\
			(B-M2)	@	@	LCD	Fixing Angle
			LCD Fixing Angle			(B-MA)
		_(B-MA)

4-9