[2] OPERATION MANUAL
°Before attaching (or detaching) the stand, unplug the AC cord.
•Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.
•Attach the stand in the correct direction.
•Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.
•Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.
1Confirm that there are 9 screws (5 short screws and 4 long screws) supplied with the stand unit.
4Insert and tighten the 4 screws into the 4 holes on the rear of the stand unit.
2 Attach the supporting post for the stand unit onto
the base using the box for the stand unit as shown below.
•The supporting post attaches to the base at an off- centered location on the base. Be sure to attach the
supporting post in the direction indicated below and attach the stand to the TV with the wider side of the
base facing forward.
_it_ | Short screws |
_9
_
,5 (_ Insert the stand cover.
(_ Insert the screw to secure the stand cover.
Short screw _!!_
3 Insert the stand into the openings on the rear of the TV.
Soft cushion
To detach the stand, perform the steps in reverse order.