Sharp 52LE920UN 10INPUT Mode Fixed, 11RCPATHTHROUGH, 12AV Position Fixed, 13LOUD Speaker ON/OFF

LC-52LE920UN/LC-60LE920UN

10)INPUT MODE FIXED

Selection

Default

Explanation

Limit in Setting

Exception

Remarks

Selection between "Variable", "Fixed", "ACON (AC CTRL)" and "AC/RCON (AC/RC CTRL)" (loop provided)

-(Variable)

•At the "Fixed" setting, the TV set gets started with the settings of "Input mode start", and then any other channels and inputs are not accepted.

•At the "ACON (AC CTRL)" setting, the TV set gets started with the settings of "Input mode start" under AC control.

•At the "AC/RCON (AC/RC CTRL)" setting, the TV set gets started with the settings of "Input mode start" under either control.

•With the execution of hotel mode, the input source is forced to change to that set by "Input mode start" and the channel switching and input switching are prohibited thereafter.

•ON-timer's (Wake-up timer) channel items are not displayed or the operation is prohibited. (Basically, they are not displayed.)

•The following keys are invalidated.

CH • / V, direct tuning button, FLASHBACK, input

However, the keys (input switching and CH • / • keys) of the unit for menu operation remain valid. None

•In the following case, setting is cancelled and mode is changed to "Variable". _When the setting of "Input mode start" is set to "Normal".

11)RC_PATH_THROUGH
Selection	Selection		between	"OFF", "ON: TV RCE" and		"ON: TV RCD" (loop provided)
Default	OFF
Explanation	Function		to feed the remote controller-received			signal to Pin 9 (open) on the RS232C.
Limit in Setting	None
Exception	None
Remarks	None
12)AV POSITION FIXED
Selection	Selection		between "Variable" and "Fixed" (loop provided)
Default	Variable
Explanation	In case	of "Fixed" setting,
	- Menu "Picture" and "Audio" setting can'tbe changed like "Dynamic (Fixed)".
	- When "AV Mode" key is pressed, TV just displays current AV Mode (cannot be changed.).
Limit in Setting	None
Exception	None
Remarks	• When		receiving with AV Position key, OPC,			Dolby key and other direct	audio select keys, the current display stays on and no
	setting	can be changed.
	• Even by initializing personal information, the hotel-mode settings are kept intact. In this way, the AV positions, video and
	audio adjustment settings are not initialized.
13)LOUD SPEAKER	(ON/OFF)
Selection	Selection		between	"ON" and "OFF" (loop provided)
Default	ON
Explanation	If "OFF"		is selected,	TV stops	Speaker output	even without Headphone	connected.
Limit in Setting	None
Exception	None
Remarks	• Press	the volume		UP/DOWN	key, and the mute icon appears for 4 seconds.

•The mute key and audio-related keys are displayed with caution.

•Usually, the headphones and monitor audio outputs can be adjustable.

14)232C POWON
Selection	Selection between "Disable" and "Enable" (loop provided)
Default	Disable
Explanation	In the standby mode, the power-on by the 232C command is enabled or disabled.
Limit in Setting	None
Exception	None
Remarks	None

5-19