Sansui SLED1953W Checking the digital signal strength, Labeling channels, Labeling video inputs

Select “Channel”, then press or ENTER. Press or to select “DTV Signal”.

Press or ENTER to check the digital signal strength.

The digital signal strength screen will appear.

If necessary, adjust the direction of the antenna to obtain the maximum signal strength.

Clear All

All channels are deleted from the channel memory.

1 Select “Channel”, then press or ENTER.

2 Press or to select “Add/Delete”, then press

or ENTER.

3 Press or to select “Clear All”, then press or ENTER.

CH Add/Delete

Adding Channel	>>
Add/Delete	>>
Clear All	>>
:Select	ENTER :Set

Checking the digital signal strength

This TV will allow you to view the digital signal meter for digital channels.

1

2

3

CH DTV Signal

0 50 100

Signal Level

NOTE:

• Signal meter feature is not available for analog channels.

• After 240 seconds, DTV Signal screen will return to normal TV operation automatically.

Labeling channels

Channel label appear with the channel number display each time you turn on the TV, select a channel, or press DISPLAY.

You can choose any four characters to identify a channel.

To create channel labels

1 Select “Channel”, then press or ENTER.

2 Press or to select “Ch Label”, then press or ENTER.

The Ch Label menu will appear.

3 Press or to select a channel you want to label, then press .

CH Ch Label

Channel Number	15-1
Ch Label	CH-1
Label Clear	>>

4		:Select	:Adjust
	Press		or	repeatedly until the character you
	want appears in the first space.
	CH Ch Label
		Channel Number		15-1
		Ch Label		CH-1
		Label Clear		>>
		:Select	:Adjust	ENTER :Set

The characters rotation as follows:

- , () @ / + = -

SPACE

If the character which you desire appears, press

ENTER.

Repeat this step to enter the rest of the characters. If you would like a blank space in the label name, you must choose the empty space from the list of characters.

5 Repeat steps 3-4 for other channel.You can assign a label to each channel.

6 When you finish inputting the label name, press EXIT to return to the normal screen.

To clear a Ch Label

After step 3 above, press or to select “Label Clear”, then press or ENTER.

NOTE:

• The channel labels will be reset after “Automatic Search” on page 18.

Labeling video inputs

The Video Label feature allows you to label each input source for your TV.

1 Select “Setup”, then press or ENTER.

2 Press or to select “Video Label”, then press or ENTER.

3 Press or to select an input which you want to label.

4 Press or to select the desired label for that input source.

Video Label

Video-

Component-

HDMI-

PC-

:Select :Adjust

–/ VCR / DVD / STB / Cable / Satellite / Receiver / Game / Camcorder / PC / DVI PC / Blu-ray

ENGLISH

19