Sansui SLED1953W owner manual Remote control, CH Channel + / / Cursor, Battery Precautions

Remote control

			6.MENU Button - Use to display the On-Screen
1			menu function.
			7.AUDIO Button - Change soundtrack language.
2			8.INPUT SELECT Button - Use to change the
			external input.
			9.PICTURE SIZE Button - Used to change the
3	10		picture size.
		10.RECALL Button - This button allows you to go
4	11		back to the previous channel selected by just
			pressing the RECALL button. Press this button
5	12		again to return to the channel you were watching.
	13	11.MUTE Button - To turn off the sound, press this
			button once. The LCD TV will be silenced and
6	14		the symbol “Mute” will appear on the screen. The
			muting feature can be released by pressing the
7
	15		MUTE button again or one of the VOL (VOLUME)
8	16		+ or – buttons.		/ Buttons
9		12.VOL (VOLUME) + / – / CURSOR
	17		- Used to operate the menu functions of the LCD
			TV. Press the	button to increase, or the button
			to decrease the sound level.
1. (POWER) Button - Used to turn the power		13.ENTER Button - Use to enter or select
on/off to the LCD TV.			information for On-Screen operations.
2.Direct Channel Selection Buttons (0-9) - Allows		14.EXIT Button - Press to remove setup menu.
direct access to any channel of the LCD TV.		15.CCD Button - Used to display the Closed Caption
3.– Button -This button is used when selecting			menu screen.
digital channels. Also can display the current		16.DISPLAY Button - When you press this button,
channel number when viewing the program.			the current information will be displayed on a
4.SLEEP Button - To set the LCD TV to turn off			screen. To remove the display from the screen,
after a preset amount of time, use the SLEEP			press this button again.
button on the remote control.	/	17.Time Shift control Buttons - See page 23.
5.CH (CHANNEL) + / – / CURSOR
Buttons - Used to operate the menu functions of
the LCD TV, and to change the channels of the
LCD TV.
Before using the remote control, batteries must first be installed.
HOW TO INSTALL BATTERIES		Use two “AAA” size batteries. The batteries may last
1. Open the battery compartment cover.		approximately one year depending on how much the
		remote control is used. For best performance, it is
		recommended that batteries should be replaced on a
		yearly basis, or when the remote operation becomes
		erratic. Do not mix old and new batteries or different
		types.
		BATTERY PRECAUTIONS
		These precautions should be followed when using
		batteries in this device:
2. Install two “AAA” batteries (supplied).		•	Use only the size and type of batteries specified.
		•	Be sure to follow the correct polarity when
			installing the batteries as indicated in the battery
			compartment. Reversed batteries may cause
		•	damage to the device.
			Do not mix different types of batteries together (e.g.
			Alkaline and Carbon-zinc) or old batteries with fresh
		•	ones.
			If the device is not to be used for a long period of
			time, remove the batteries to prevent damage or
3. Replace the battery compartment cover.		•	injury from possible battery leakage.
			Do not try to recharge batteries not intended to be
			recharged; they can overheat and rupture. (Follow
			battery manufacturer’s directions.)

10