Connections & Setup
Jacks on the Back of Your TV
If you al'e cormecting many components, please consult tile man_.tal that came with each component I_:)rconnection instructions. The picture of your TV's back pLIlle[ describes tile jacks on the I_ack of your TV and what types of conlponents that you can connect to these jacks.
When connecting, make sure you connect Output jacks to Input iacks. Video to Video, Right Audio to Right Audio, etc.
Audio and Video Input Jacks:
AUDIO R and L/MONO and VIDEO
Connect any of the following components:
• DVD Player | o Satellite Receiver |
• Laserdisc Player - VCR
• Internet Access Device
To watch the content from tile component that's
connected to the VIDEO Input Jack, press the
WHO • INPUT button on the remote (the TV switches to the correct channel).
J
TV (backpanel)
Audio Output Jacks: R and L OUT
Connect audio cables to
these iacks and to an amplifier or audio receiver for improved sound quality.
/
/
VIDEO R AODID L/MONO /'
/
{o | k |
| |
el" | _ CABLE/ | ||
@ | |||
ANTENNA | |||
|
| ||
|
|
/
G-LINK Jack
Connect the end of the
Guide Plus+ system to interact with the cable box
and/or the VCR. A picture of the
page 7.
/
S-VIDEO Jack
Connecting an
optional
quality than a regular video cable.
]CABLE/ANTENNA Jack
Connect the coaxial callle
from tile VCR's Output jack to this iack. If you're not
connecting a VCR, connect a coaxial cable that carries tile
signal flon] the antenna, cal)le, or cable box to the
CABLE/ANTENNA iack.
12 | Chapterl |