Connections & Setup
Why You Should Connect This G-LINK Cable
The
Cable Box- If your 'Ix,' is connected to a cable box you must connect tire G LINK cable to rece ve TV program listings Ik)r y()ur area, :ill(.]tO tune directly to a channel when the program guide is on your TV screen.
VCR- If your "IA' is connected to a VCR and you don't connect the
How to Find the Remote Sensor
You have to place the G LINK wands in fi'ont of the remote sensor on the VCR and/or cable box. Sonre cable boxes and VCRs have the remote sensor labeled on the unit. If the remote sensor isn't
labeled on your VCR and/or cahle box, you need to use the remote control that came with the VCR and/or cable box to locate the sensor.
1. Turn off the VCR and/or cable box.
2. Hold the remote control (not the one that came with your TV, but the one that came with the
G-LINK wands
cable box and/or VCR to wbich you're attaching the
3.Slowly nrove the remote control across the front of tl_e component (VCR or cable box) while you press the power button on and off. You must press and release the power button each time you move the remote (bolding down the button won't work).
4, When the component turns on, you've located the renrote sensor.
If you don't have both a
cable box and a VCR connected to your T_,
just coil the cable of the extra
a twist tie and leave it behind the TV
Placing the G-LINK Wands
Place the
TV (ba©kpanel)
Connect to
/_ | mortthe ba_:k of the _. | _'_l | I_ | _. |
Chapter | 1 | 13 |