_f_J_dwmr_#m.PmN_rcJK_W_7_rttm4rl_m
k_o_,_t _ | wI m_c _ a bkm er _ | _ | _ wa_ | TV. |
Wht<_ _1 is your "fV tuned to v/hen usk_J
_02
._ 03
Connections & Setup
3.Highlight the channel to which you have to tune your TV in order to see
cable programnling, and press OK (a screen appears l_minding you to
connect your
Notes: C'bamze/ 03 l_ tbe mos! cnnnnou
Choose lqden l/Mf_7_"iJ_rottr cable box is conm,cted to yonr TVwitb
andio/video cables instead q['a coaxial cable. Go to page" 7Jbrpictures (_/" thes_ _ cclblt_s.
4.Highlight your bnmd o[ cahle box. and press OK.
If your brand isn't listed, highlight Not Listed and press OK.
,
.
Make sure your cable box is on.
Tune flae cable box to channel 02 (use tim remote control that came with your cable box, or press the channel buttons on the cane box).
Press OK (the GUIDE Plus+ system starts testing codes).
Important Note: When code testing is in progress, don't touch your TV,, VCR, cable box or any of the remote controls for theseproducts.
Look at your cable box. If it is still on and changed to channel 09, the test was successful. Highlight Yes, and press OK (STEP 3: Configuring for a VCR appears).
ffyour cane box didn't change to channel 09 or turned itself off, you have two choices: No and Test this code again.
Test this code again: If you think the TV, tire cable box, or any of the remote controls might have been touched or bumped during the test,
highlight Test this code again and press OK (the GUIDE Plus+ system runs dae same set of codes).
No: If you don't think the test was interrupted, highlight No and press OK (GUIDE Plus+ system tests the next code).
Repeat the previous instructions until the TV finds the correct cable box code. Follow the instructions on the screen.
Note: I/'the TV can ?find your cable box code, a troubleshooting checklist appears. Carefully review each checklist and follow the
inMrTlclions | on the screen. |
Chapter | 1 | 17 |