Sanyo CD-RW880 owner manual Listening to a CD, Cd-Rw, CD-R no TOC, CD-RW no TOC

Page 10

Listening to a CD

43 6

5

1

1Press the POWER switch.

The unit enters standby mode, and “STAND-BY” lights on the display.

2Press the STANDBY/ON button of the remote control unit to turn the unit on.

When no disc is set, “NO DISC” appears on the display.

<If one of the following buttons is pressed in the standby mode, the unit will also turn on:

OPEN/CLOSE, PLAY, STOP

3Press the OPEN/CLOSE button (L).

4Place a disc on the tray with the printed label face up.

<Never place more than one disc on the tray.

<The disc must be placed in the center of the disc tray. If the disc is not correctly loaded, it may not be possible to open the tray again once it has closed, so you should ensure the disc is always centered on the tray.

<Do not force the tray by hand during opening and closing operations.

5Press the OPEN/CLOSE button (L) to close the tray.

<It takes a few seconds for the unit to load the disc. No buttons will work during loading. Wait until the total number of the tracks and the total play time of the disc are displayed.

disc type indicator

total number of the tracks

total play time of the disc

<The disc type indicator shows the type of disc currently loaded.

CD:

A commercial pre-recorded CD

CD-R:

A finalized CD-R

CD-RW:

A finalized CD-RW

CD-R NO TOC :

A CD-R which has yet to be finalized

CD-RW NO TOC :

A CD-RW which has yet to be finalized

blank:

No disc

6Press the PLAY button (y) to start playback.

Disc playback starts from the first track, and the PLAY indicator (y) lights on the display.

<If you load the disc, and then press the PLAY button without having first closed the disc tray, the disc tray closes and playback starts.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents CD-RW880 Important Safety Instructions For U.S.A Type SF-W36FR Manufacturer Laser outputContents Before using the unitAnalog IN/OUT jacks AC Power CordConnections Digital in terminalDiscs CD-RCD-RWAbout CD-R and CD-RW discs Remote Control UnitBattery Installation FinalizingUnit Functions and Remote Control O N M L K JMusic Skip PowerOPEN/CLOSE Pause JCD-RW Listening to a CDCD-R CD-R no TOCTo stop playbacks Standby modeTo suspend playback temporarily pause mode To skip to the next or a previous trackShuffle Playback Direct PlaybackTime Display To repeat a designated section Repeat PlaybackRepeat Repeat ALL Repeat All the TracksProgrammed Playback Press the Program button in the stop modePress the numeric button to select a track Before Recording Digital Optical RecordingLoad a recordable CD-R or CD-RW disc into the unit Analog AnalogManual track division Input MonitoringAutomatic Track Division Track -60, -50, -40 or -30 dBSync ALL Synchronous RecordingTo start synchronous recording SyncFinalize Press the Play y button to start finalizingErase Disc Erase or Unfinalize a CD-RWErase and the number of the last track recorded on the disc RefreshCD Recorder TroubleshootingMaintenance Beware of condensationMessages SpecificationsError Messages MessagesAvertissement SommaireAvant l’utilisation Quand Vous Déplacez CET L’APPAREILSortie Digital OUT RaccordementPrises d’entrée et sorties Analog IN/OUT Cordon d’alimentation ACDisques Finalisation Boîtier de télécommandeRemarques concernant les disques compacts CD-R et CD-RW Mise en place des pilesNomenclatures des controles Touches numériques Capteur de télécommandeAffichage Plateau porte-disque RemarqueAppuyez sur la touche OPEN/CLOSE L pour fermer le tiroir Appuyez sur l’interrupteur PowerÉcoute de CD Appuyez sur la touche Play y pour engendrer la lecturePour arrêter la lecture Mode veillePour suspendre la lecture momentanément mode pause Pour sauter au morceau suivant ou précédantLecture aléatoire Lecture DirecteAffichage du temps Répétition d’une section désignée Lecture répétéeRépétition A-B Repeat ALL Répétition de tout le disquePour contrôler l’ordre programmé En mode arrêt, appuyez sur la touche ProgramLecture Programmée Pour ajouter un morceau à la fin du programmePour effacer la liste programmée Avant d’enregistrerPour enlever un morceau de la liste programmée Système de gestion de copie en sérieEnregistrement Appuyer sur la touche RecordDivision manuelle de morceau Contrôle d’entréeDivision automatique de morceau Track -60, -50, -40 ou -30 dBEnregistrement synchronisé Pour démarrer l’enregistrement synchroniséFinalisation Appuyez sur la touche Play y pour commencer la finalisationEffacement ou dé-finalisation d’un CD-RW Mise en garde sur la condensation DépannageLecteur CD EntretienAffichage des erreurs Accessoires standardSpécifications FS 441K, FS 32K ou FS 48KTeac Corporation

CD-RW880 specifications

The Sanyo CD-RW880 is a well-regarded audio device that embodies the transition from analog to digital media. As a versatile CD recorder, it captures both the nostalgia of traditional CD playback and the conveniences of modern digital recording technology. Designed for music enthusiasts and professionals alike, the CD-RW880 features a range of specifications that enhance its performance and usability.

One of the standout features of the Sanyo CD-RW880 is its ability to record onto CD-R and CD-RW discs. This flexibility allows users to create custom compilations and backup their favorite tracks with ease. The device supports a range of recording speeds, which includes options for both high-speed recording and standard speeds that ensure optimal quality. The capability to erase and re-record on CD-RW media further distinguishes it from standard CD players, providing a convenient and practical solution for digital music management.

The CD-RW880 employs advanced digital signal processing (DSP) technology, which plays a crucial role in maintaining audio fidelity during both playback and recording. It features a built-in A/D converter that ensures high-quality sound reproduction while minimizing noise and distortion. With a signal-to-noise ratio that meets professional standards, users can expect clear and accurate audio playback, whether they are recording live performances or transferring existing CDs.

Additionally, the Sanyo CD-RW880 is equipped with a user-friendly interface that makes navigation intuitive. The front panel includes dedicated buttons for recording, play, pause, and track selection, providing a seamless experience for users of all skill levels. The inclusion of a LCD display gives users quick access to important information such as track number, recording time, and remaining space on the disc.

Another noteworthy characteristic is the device's compatibility with both audio and data CDs, allowing it to function not just as an audio recorder but also as a versatile media player. This feature opens up possibilities for creating data backups and archiving important files onto CD format, which can be a useful addition for both personal and professional uses.

In summary, the Sanyo CD-RW880 is a multifunctional CD recorder that appeals to a broad audience from casual music lovers to professionals in the industry. With its solid recording capabilities, superior audio quality, and user-centric design, this device stands as a reliable choice for anyone looking to bridge the gap between analog sound and digital convenience. Whether for creating custom playlists, transferring music, or archiving precious audio content, the CD-RW880 continues to be a valuable tool in an increasingly digital world.
Top Page Image Contents