Sanyo CD-RW880 Synchronous Recording, To start synchronous recording, Sync ALL, Sync OFF

Page 19

Synchronous Recording

Synchronous recording means that recording will begin automatically when a signal is received, and will stop when the signal ends.

The conditions under which an input signal is used as the trigger to start recording are:

when recording a CD digitally, a digital start signal is detected, and audio is also detected

or

when recording an MD or DAT digitally, a digital start signal is detected

or

the sound level has dropped below the increment level for one second or more, and has then risen above the increment level again

The conditions under which synchronized recording stops are:

when recording digitally, a digital stop signal is detected or

the sound level drops below the increment level for 5 seconds

To start synchronous recording

1After step 3 of page 16, press the SYNC 1/ALL button and select SYNC 1 or SYNC ALL.

When the SYNC 1/ALL button is pressed once, the current setting is displayed. Press the SYNC 1/ALL button repeatedly to select any other setting.

SYNC ALL

Select this to record all the tracks.

SYNC 1

Select this to record only one track.

SYNC OFF

Select this when you don’t use this function.

The SYNC indicator lights when SYNC ALL or SYNC 1 is selected.

2Press the RECORD button.

The unit enters record pause mode.

<The PLAY or the PAUSE button doesn’t work in synchronous record pause mode.

3Start playing the source.

The unit will start synchronous recording.

<During digital synchronous recording, if the input signal stops for 5 seconds, recording will stop automatically.

<Press the STOP button to stop the recording manually.

<If you press the STOP button or the PAUSE button during recording, the synchronous recording function will be cancelled.

<The synchronous recording function automatically turns off after the recording.

<The SYNC 1/ALL button doesn’t work during recording or in the record pause mode.

<When SYNC ALL is selected, AUTO TRACK is always on. Select –60, 50, 40 or 30 dB using the AUTO/MANUAL button.

<If the AUTO/MANUAL button is set to MANUAL, AUTO TRACK (–60 dB) will be selected during synchronous recording. The setting automatically returns to MANUAL after the recording.

ENGLISH

19

Image 19
Contents CD-RW880 Important Safety Instructions Type SF-W36FR Manufacturer Laser output For U.S.ABefore using the unit ContentsDigital in terminal AC Power CordConnections Analog IN/OUT jacksCD-RCD-RW DiscsFinalizing Remote Control UnitBattery Installation About CD-R and CD-RW discsO N M L K J Unit Functions and Remote ControlPause J PowerOPEN/CLOSE Music SkipCD-R no TOC Listening to a CDCD-R CD-RWTo skip to the next or a previous track Standby modeTo suspend playback temporarily pause mode To stop playbacksShuffle Playback Direct PlaybackTime Display Repeat ALL Repeat All the Tracks Repeat PlaybackRepeat To repeat a designated sectionProgrammed Playback Press the Program button in the stop modePress the numeric button to select a track Before Recording Analog Analog RecordingLoad a recordable CD-R or CD-RW disc into the unit Digital OpticalInput Monitoring Manual track divisionTrack -60, -50, -40 or -30 dB Automatic Track DivisionSync Synchronous RecordingTo start synchronous recording Sync ALLPress the Play y button to start finalizing FinalizeRefresh Erase or Unfinalize a CD-RWErase and the number of the last track recorded on the disc Erase DiscBeware of condensation TroubleshootingMaintenance CD RecorderMessages SpecificationsError Messages MessagesQuand Vous Déplacez CET L’APPAREIL SommaireAvant l’utilisation AvertissementCordon d’alimentation AC RaccordementPrises d’entrée et sorties Analog IN/OUT Sortie Digital OUTDisques Mise en place des piles Boîtier de télécommandeRemarques concernant les disques compacts CD-R et CD-RW FinalisationNomenclatures des controles Remarque Capteur de télécommandeAffichage Plateau porte-disque Touches numériquesAppuyez sur la touche Play y pour engendrer la lecture Appuyez sur l’interrupteur PowerÉcoute de CD Appuyez sur la touche OPEN/CLOSE L pour fermer le tiroirPour sauter au morceau suivant ou précédant Mode veillePour suspendre la lecture momentanément mode pause Pour arrêter la lectureLecture aléatoire Lecture DirecteAffichage du temps Repeat ALL Répétition de tout le disque Lecture répétéeRépétition A-B Répétition d’une section désignéePour ajouter un morceau à la fin du programme En mode arrêt, appuyez sur la touche ProgramLecture Programmée Pour contrôler l’ordre programméSystème de gestion de copie en série Avant d’enregistrerPour enlever un morceau de la liste programmée Pour effacer la liste programméeAppuyer sur la touche Record EnregistrementContrôle d’entrée Division manuelle de morceauTrack -60, -50, -40 ou -30 dB Division automatique de morceauPour démarrer l’enregistrement synchronisé Enregistrement synchroniséAppuyez sur la touche Play y pour commencer la finalisation FinalisationEffacement ou dé-finalisation d’un CD-RW Entretien DépannageLecteur CD Mise en garde sur la condensationFS 441K, FS 32K ou FS 48K Accessoires standardSpécifications Affichage des erreursTeac Corporation

CD-RW880 specifications

The Sanyo CD-RW880 is a well-regarded audio device that embodies the transition from analog to digital media. As a versatile CD recorder, it captures both the nostalgia of traditional CD playback and the conveniences of modern digital recording technology. Designed for music enthusiasts and professionals alike, the CD-RW880 features a range of specifications that enhance its performance and usability.

One of the standout features of the Sanyo CD-RW880 is its ability to record onto CD-R and CD-RW discs. This flexibility allows users to create custom compilations and backup their favorite tracks with ease. The device supports a range of recording speeds, which includes options for both high-speed recording and standard speeds that ensure optimal quality. The capability to erase and re-record on CD-RW media further distinguishes it from standard CD players, providing a convenient and practical solution for digital music management.

The CD-RW880 employs advanced digital signal processing (DSP) technology, which plays a crucial role in maintaining audio fidelity during both playback and recording. It features a built-in A/D converter that ensures high-quality sound reproduction while minimizing noise and distortion. With a signal-to-noise ratio that meets professional standards, users can expect clear and accurate audio playback, whether they are recording live performances or transferring existing CDs.

Additionally, the Sanyo CD-RW880 is equipped with a user-friendly interface that makes navigation intuitive. The front panel includes dedicated buttons for recording, play, pause, and track selection, providing a seamless experience for users of all skill levels. The inclusion of a LCD display gives users quick access to important information such as track number, recording time, and remaining space on the disc.

Another noteworthy characteristic is the device's compatibility with both audio and data CDs, allowing it to function not just as an audio recorder but also as a versatile media player. This feature opens up possibilities for creating data backups and archiving important files onto CD format, which can be a useful addition for both personal and professional uses.

In summary, the Sanyo CD-RW880 is a multifunctional CD recorder that appeals to a broad audience from casual music lovers to professionals in the industry. With its solid recording capabilities, superior audio quality, and user-centric design, this device stands as a reliable choice for anyone looking to bridge the gap between analog sound and digital convenience. Whether for creating custom playlists, transferring music, or archiving precious audio content, the CD-RW880 continues to be a valuable tool in an increasingly digital world.